10G XFP, 100 GHz Grid - C-Band DWDM ZR+ with dual CDR 100 km / 25 dB, LC-Duplex
- DWDM 100 GHz
- 100 km
- 11.1 G
- Dual CDR
- 10G ETH
- 10G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | XFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | DWDM |
Compliance Code | DWDM ZR+ |
Distance | 100 km |
Temperature Range | -5°C - 70°C |
Bandwidth | 9.95 Gbit/s - 11.1 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 3.5 W |
---|---|
CDR | TX and RX |
Inbuilt FEC | No |
Powerbudget (dB) | 25 dB |
Transmit min/max per lane | 0 dBm / 4 dBm |
Receiver min/max per lane | -25 dBm / -7 dBm (overload) @10G |
Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
Wavelength RX (Range) | 1520 - 1600 nm |
Laser | EML |
---|---|
Receiver Type | APD |
Modulation | NRZ @10G |
Transmit and Dispersion Penalty | 3 dB |
Chromatic Dispersion Tolerance | -500 ps/nm to 1,450 ps/nm @10G |
Extinction Ratio | 9 dB |
Supported Protocols | 10G Ethernet, 10G FC, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN # compatible
- ADVA 0061701811-03 compatible
- ADVA 1061701401-05 compatible
- Allied Telesis # compatible
- Avaya (ex. Nortel) # compatible
- Brocade / Ruckus 10G-XFP-ZRD-1538-77 compatible
- Ciena (ex. Nortel) NTK587AA-E5 compatible
- Cisco Systems XFP-10GZR-OC192LR compatible
- Cyan 280-0016-00 compatible
- D-LINK # compatible
- Dell # compatible
- Dell (ex. Force10) GP-XFP-W61 compatible
- Edge Core # compatible
- Ericsson RDH901011/61 compatible
- Extreme (ex. Enterasys) 10GBASE-ZR-XFP compatible
- Extreme 10261 compatible
- F5 Networks # compatible
- Fortinet # compatible
- Fujitsu FIM31063/120W61 compatible
- H3C (ex. 3COM) # compatible
- Hirschmann # compatible
- Hitachi # compatible
- HP H3C JD107A compatible
- Huawei DWDM-XFP10G-1528-7 compatible
- Infinera (ex. Transmode) TRX100032/961 compatible
- Juniper (ex BTI Systems) BP3AM4LI compatible
- Juniper XFP-10GE-ZR compatible
- Keysight (ex. Ixia) # compatible
- LevelOne # compatible
- Marconi SU69BD compatible
- McAfee # compatible
- MikroTik # compatible
- Moxa # compatible
- MRV XFP-DWLR08-61 compatible
- Netgear # compatible
- Nokia (ex. Alcatel-Lucent) XFP-10G-DWDM-61 compatible
- Nokia Siemens Networks V50017-U789-K500 compatible
- Packetlight UL100L-CH61 compatible
- Palo Alto Networks # compatible
- Radware # compatible
- Ribbon (ex. ECI) OTR10_AL61 compatible
- Transition Networks # compatible
- Zyxel # compatible
What customers say
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.