10GBASE-T Industrial Copper SFP+ 30 m, RJ-45, RX_LOS
Universal Copper SFP+ Transceiver
Use FLEXBOX to configure to almost any vendor
Supported Data Rates: 10.3 Gbit/s
Up to 30 m via CAT6a Cable
RJ-45 connector
Operating Temperature from -40°C to 85°C
Specs
- Copper
- 30 m
- 10.3 G
- Industrial
Protocols
- 10G ETH
-
Alternatives
-
Alternatives
Specification
Form Factor | SFP+ |
---|---|
Connector / Polish | RJ-45 |
Interface | Copper |
Compliance Code | T |
Distance | 30 m |
---|---|
Temperature Range | -40°C - 85°C |
Bandwidth | 10.3 Gbit/s |
Digital Diagnostic Management (DDM) | not implemented |
Power Consumption | 2.5 W |
---|---|
Special Features | RX_LOS |
Supported Protocols | 10G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems SFP-H10GB-CU5M compatible
- Dell 407-BBBG compatible
- Dell 407-BCVF compatible
- Netgear AXM765 compatible
- Nimblestorage SFP-10G-T compatible
- Ubiquiti Networks UF-RJ45-10G compatible
Your vendor / compatibility is missing?
What customers say
The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN.
Thank you FLEXOPTIX
Sylvain Brisebois
Advance Research, Senior Firmware Engineer, KINOVA
Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver
Mike Dallaway
Mira 2014 Limited
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
David Schoefberger
Schoefberger
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect
Aviatrix