10GBASE-T Copper SFP+ 30 m, RJ-45, RX_LOS

Universal Copper SFP+ Transceiver
Use FLEXBOX to configure to almost any vendor
Supported Data Rates: 10.31 Gbit/s
Up to 30 m via CAT6a Cable
RJ-45 connector
Specs
  • Copper
  • 30 m
  • 10.31 G
Protocols
  • 10G ETH

Related Know How:

Request compatibility
Part number
T.C96.02.KF
In stock
3390 pcs
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

Higher Temperature Range
10GBASE-T Industrial Copper SFP+ 30 m, RJ-45, RX_LOS 
10GBASE-T Industrial Copper SFP+ | 30 m, RJ-45, RX_LOS
29 pcs in stock 158.00 EUR

Specification

Form Factor SFP+
Connector / Polish RJ-45
Interface Copper
Type T
Distance 30 m
Temperature Range 0°C - 70°C
Bandwidth 10.31 Gbit/s
Digital Diagnostic Management (DDM) not implemented
Power Consumption 3 W
Special Features RX_LOS
Supported Protocols 10G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Arista Networks SFP-10G-T compatible
  • Arista SFP-10G-T compatible
  • Arista SFP-1G-T compatible
  • Aruba Networks(ex. HP Network) 813874-B21 compatible
  • Avaya (ex. Nortel) AA1403043-E6 compatible
  • barox AC-SFP+-T compatible
  • Brocade / Ruckus 10G-SFPP-SR compatible
  • Cambium Networks SFP-10G-Copper compatible
  • Ciena (ex. Nortel) NTTP30CFE6 compatible
  • Cisco (ex. Meraki) MA-CBL-TA-3M compatible
  • Cisco Systems SFP-10G-T-X compatible
  • Cisco Systems SFP-H10GB-ACU10M compatible
  • Cisco Systems SFP-H10GB-CU5M compatible
  • ComNet SFP-49 compatible
  • D-LINK DEM-CB700S compatible
  • Dell (ex. Force10) GP-10GSFP-T compatible
  • Dell 407-BBOU compatible
  • Dell 407-BBWL compatible
  • Dell 407-BBWT compatible
  • Dell SFP-10G-T-MG-30M compatible
  • Delock 86460 compatible
  • Edge Core ET5402-SR compatible
  • Extreme 10307 compatible
  • Extreme 10338 compatible
  • Fluke Networks OPVXG-SFP-PLUS-LR compatible
  • Fortinet FN-TRAN-SFP+GC compatible
  • Fortinet FS-TRAN-SFP+GC compatible
  • Fortinet SP-CABLE-ADASFP+ compatible
  • Fujitsu ETVHVJ-L compatible
  • Gigamon SFP-10G-RJ45 compatible
  • Huawei SFP-10G-DAC5M compatible
  • Infortrend 10GBase-T compatible
  • Intel E10GSFPSR compatible
  • Juniper EX-SFP-10GE-DAC-1M compatible
  • Juniper JNP-SFPP-10GE-T compatible
  • Juniper SFPP-10G-T compatible
  • Kemp Technologies LM-SFP-SR compatible
  • LANCOM FP-CO1_10 compatible
  • MikroTik S+RJ10 compatible
  • Moxa SFP-10GTXRJ45-T compatible
  • Myricom SFP-10G-T compatible
  • Net Insight NPA0077-LRD1 compatible
  • Netgear AXM765 compatible
  • NoviFlow 400000519 compatible
  • Nvidia (ex. Mellanox) MC3309130-001 compatible
  • Palo Alto Networks PAN-SFP-PLUS-10GBASE-T compatible
  • QLogic SFP10-SR-SP compatible
  • QNAP 10G-T compatible
  • RAD SFP-P-13 compatible
  • Sonnet Technologies G10-SFP-T compatible
  • Sophos ASF-10G-T compatible
  • StarTech SFP10GBTST compatible
  • Supermicro AOM-AQS-107-B0C2-CX compatible
  • Ubiquiti Networks UF-RJ45-10G compatible
  • Zyxel SFP10G-SR compatible
  • Alcatel-Lucent Ent. SFP-10G-T compatible
  • Allied Telesis AT-SP10T compatible
Your vendor / compatibility is missing?

What customers say

Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver
Mike Dallaway Mira 2014 Limited

When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.

Stefan Lieven Teamleitung EDV / Pflegeheime Esslingen
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri CTO, SGN d.o.o.

A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.

Ten out of ten, absolutely recommended!

Roman Beyerle CODESYS GmbH
More