QSFP28 to SFP28 adapter with MCU QSA adapter, converter module, Multimode, Singlemode
QSFP28
ADAPTER
Universal'>Universal Adapter Module for QSFP28
Use FLEXBOX to configure to almost any vendor
Use SFP28 in QSFP28 port of your device
Transceivers are not included and sold separately
Lower Power Consumption than using an equivalent QSFP28
For usage in some Cisco devices
Supported Data Rates: 25.7 Gbit/s
Specs
- Adapter
- 25.7 G
- SFP28
Protocols
- 10G ETH
- 1G ETH
- 25G ETH
Specification
| Form Factor | QSFP28 |
|---|---|
| Temperature Range | 0°C - 70°C |
| Digital Diagnostic Management (DDM) | depends on transceiver |
| CDR | none |
|---|---|
| Inbuilt FEC | No |
| Supported Protocols | 25G Ethernet, 10G Ethernet, Gigabit Ethernet |
| Power Consumption | 0.3 W |
|---|---|
| Compliance Code | ADAPTER |
| Interface | SFI |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- MSA Standard (40G) compatible
- Arista 3rd_Party QSFP-100G-SR4 compatible
- Arista QSFP-100G-SR4 compatible
- Arista QSFP-40G-SR4 compatible
- Cisco Mod. QSFP-40G-SR4 compatible
- Cisco Systems QSFP-100G-LR4-S compatible
- Cisco Systems QSFP-100G-SR4-S compatible
- Cisco Systems QSFP-40G-SR4 compatible
- Extreme (ex. Enterasys) 40GB-SR4-QSFP compatible
- Extreme 100G-SR4-QSFP100M compatible
- Extreme 10319 compatible
- Extreme 10401 compatible
- Juniper QFX-QSFP-40G-SR4 compatible
- Juniper QSFPP-4X10GE-SR compatible
Your vendor / compatibility is missing?
What customers say
Just wanted to express my giddy happiness at how fast your crack team of ninjas were able to get optics to my desk.
Donal Cunningham
Senior Network Engineer - Airspeed Telecom
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect
Aviatrix
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Christophe Mulkers
CEO/CTO, Oufti Connections
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt
Head of Platforms & Services, grandcentrix GmbH