STM-4 SFP CWDM ~40 km / 23 dB, 1270 nm - 1610 nm, DDM, LC-Duplex

Universal SDH SFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
Capable of operating in SDH / SONET networks
Supported Data Rates: 100 Mbit/s - 622 Mbit/s
Powerbudget of 23 dB for up to 40 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
  • CWDM
  • ~40 km / 23 dB
  • 622 M
Protocols
  • 100M ETH
  • STM-1
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.1606.19.xD

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Matching Products

LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface CWDM
Compliance Code CWDM STM-4
Distance 40 km
Temperature Range 0°C - 70°C
Bandwidth 100 Mbit/s - 622 Mbit/s
Digital Diagnostic Management (DDM) Internally Calibrated
Power Consumption 1 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 23 dB
Transmit min/max per lane -5 dBm / 0 dBm
Receiver min/max per lane -28 dBm / -8 dBm (overload) @100M - 800M
Wavelength TX (Typical) Channel R - 1610 nm
Wavelength RX (Range) 1100 - 1650 nm
Laser DFB
Receiver Type PIN
Modulation NRZ @100M - 800M
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 8.2 dB
Supported Protocols Fast Ethernet, STM-1, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADTRAN 1442703PG9 compatible
  • Ciena (ex. Nortel) NTTP04CF compatible
  • Marconi SU67AB compatible
  • Nokia (ex. Alcatel-Lucent) 1AB196360006 compatible
  • OTN Systems V30813-S8-A1 compatible
Your vendor / compatibility is missing?

What customers say

The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!

We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.

The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.

The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.

Tim Waterham ICT Infrastructure Engineer - Wyre Borough Council

We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.

Axel Hauguel CEO / Dyjix
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well. Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play. If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before. Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect Aviatrix
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!
Michael Nicolaou Senior Network Consultant, CDMA Services Ltd
More