1G SFP BiDi ZX+ Extended 120 km, ᵀˣ1570 / ᴿˣ1510 nm, DDM, LC-Simplex, Singlemode
- 1570 nm
- 120 km
- 1.25 G
- Extended
- 100M ETH
- 1G ETH
- 1G FC
- STM-1
- STM-4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi ZX+ |
| Distance | 120 km |
| Temperature Range | -20°C - 85°C |
| Bandwidth | 125 Mbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
| CDR | none |
|---|---|
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 33 dB |
| Transmit min/max per lane | 0 dBm / 5 dBm |
| Receiver min/max per lane | -33 dBm / -8 dBm (overload) @1G |
| Wavelength TX (Typical) | 1570 nm |
| Wavelength TX (Range) | 1564 - 1577.5 nm |
| Wavelength RX (Typical) | 1510 nm |
| Wavelength RX (Range) | 1490 - 1530 nm |
|---|---|
| Laser | DFB |
| Receiver Type | APD |
| Modulation | NRZ @1G |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # compatible
- ADTRAN # compatible
- ADVA # compatible
- Allied Telesis # compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) # compatible
- Avaya (ex. Nortel) # compatible
- Brocade # compatible
- Check Point # compatible
- Ciena (ex. Nortel) # compatible
- Cisco Systems GLC-BX80-D-I compatible
- D-LINK # compatible
- Dell # compatible
- Dell (ex. Force10) # compatible
- Edge Core # compatible
- Ericsson # compatible
- Extreme (ex. Enterasys) # compatible
- F5 Networks # compatible
- FibroLAN # compatible
- Fluke Networks # compatible
- Fortinet # compatible
- Fujitsu # compatible
- H3C (ex. 3COM) # compatible
- Hirschmann SFP-GIG-BA LX/LC compatible
- HP H3C # compatible
- Huawei # compatible
- Infinera (ex. Transmode) # compatible
- Intel # compatible
- Juniper (ex BTI Systems) # compatible
- Juniper SRX-SFP-1GE-LX compatible
- Keymile 37973100 compatible
- KTI Networks # compatible
- LANCOM # compatible
- Lenovo (ex. Blade Network) # compatible
- LevelOne # compatible
- Lynx # compatible
- MikroTik # compatible
- Motorola # compatible
- Moxa # compatible
- MRV # compatible
- Netgear # compatible
- Nokia (ex. Alcatel-Lucent) 1AB393080010 compatible
- Nokia (ex. Alcatel-Lucent) 3HE01389CA compatible
- Nokia Siemens Networks # compatible
- Nvidia (ex. Mellanox) # compatible
- Palo Alto Networks # compatible
- Quanta # compatible
- Radware # compatible
- Ribbon (ex. ECI) # compatible
- TP-LINK # compatible
- Transition Networks # compatible
- Ubiquiti Networks UF-SM-1G-S YE compatible
- Waystream (ex. Packetfront) # compatible
- Westermo 1100-0527 compatible
- Zyxel # compatible
What customers say
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.