1G SFP BiDi ZX Extended 80 km, ᵀˣ1490 / ᴿˣ1570 nm, DDM, LC-Simplex, Singlemode
- 1490 nm
- 80 km
- 1.25 G
- Extended
- 100M ETH
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi ZX |
| Operating Temperature | Industrial |
| Modulation | NRZ |
| Distance | 80 km |
| Temperature Range | -20°C - 85°C |
| Bandwidth | 125 Mbit/s - 1.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 26 dB |
| Transmit min/max per lane | 0 dBm / 5 dBm |
| Receiver min/max per lane | -26 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 1490 nm |
| Wavelength TX (Range) | 1483.5 - 1497 nm |
|---|---|
| Wavelength RX (Typical) | 1570 nm |
| Wavelength RX (Range) | 1550 - 1590 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # compatible
- ADTRAN 1442180G2 compatible
- ADVA # compatible
- Allied Telesis # compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) J4860C compatible
- Avaya (ex. Nortel) # compatible
- Brocade # compatible
- Check Point # compatible
- Ciena (ex. Nortel) # compatible
- Ciena XCVR-080U49 compatible
- Cisco Systems GLC-BX80-U-I compatible
- D-LINK # compatible
- Dell # compatible
- Dell (ex. Force10) # compatible
- Edge Core # compatible
- Ericsson # compatible
- Extreme # compatible
- Extreme (ex. Enterasys) # compatible
- F5 Networks # compatible
- FibroLAN # compatible
- Fluke Networks # compatible
- Fortinet # compatible
- Fujitsu # compatible
- H3C (ex. 3COM) # compatible
- Hirschmann # compatible
- HP H3C # compatible
- Huawei # compatible
- Infinera (ex. Transmode) # compatible
- Intel # compatible
- Juniper (ex BTI Systems) # compatible
- Juniper SFP-1GE-LH compatible
- Keymile # compatible
- KTI Networks # compatible
- LANCOM # compatible
- Lenovo (ex. Blade Network) # compatible
- LevelOne # compatible
- Lynx # compatible
- MikroTik # compatible
- Motorola # compatible
- Moxa SFP-1G40ALC compatible
- MRV # compatible
- Netgear # compatible
- Nokia (ex. Alcatel-Lucent) SFP-GIG-BX-D compatible
- Nokia Siemens Networks # compatible
- Nvidia (ex. Mellanox) # compatible
- Palo Alto Networks # compatible
- Quanta # compatible
- Radware # compatible
- Ribbon (ex. ECI) # compatible
- TP-LINK # compatible
- Transition Networks # compatible
- Ubiquiti Networks # compatible
- Waystream (ex. Packetfront) # compatible
- Zyxel # compatible
What customers say
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.
For years we struggled with hundreds of transceivers from different vendors but this is finally over!
With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!