155M SFP STM-1 BiDi 100 km, ᵀˣ1590 / ᴿˣ1510 nm, DDM, LC-Simplex, Singlemode
- 1590 nm
- 100 km
- 622 M
- 100M ETH
Just go to cart and click CREATE QUOTE.
|Connector / Polish||LC-Simplex UPC|
|Temperature Range||0°C - 70°C|
|Bandwidth||100 Mbit/s - 622 Mbit/s|
|Digital Diagnostic Management (DDM)||Yes, internally calibrated|
|Power Consumption||1 W|
|Powerbudget (dB)||28 dB|
|Transmit min/max per lane||0 dBm / 5 dBm|
|Receiver min/max per lane||-28 dBm / -3 dBm (overload)|
|Wavelength TX (Typical)||1590 nm|
|Wavelength TX (Range)||1583.5 - 1597 nm|
|Wavelength RX (Typical)||1510 nm|
|Wavelength RX (Range)||1490 - 1530 nm|
|Extinction Ratio||10 dB|
|Supported Protocols||Fast Ethernet, STM-1, STM-4|
Transceiver Configuration with FLEXBOXIt's that easy to use
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Marconi SU66AC compatible
- Marconi SU67AC compatible
- Nokia (ex. Alcatel-Lucent) 1AB196360007 compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.