1G SFP BiDi LX 3 km, ᵀˣ1550 / ᴿˣ1310 nm, DDM, LC-Simplex, Singlemode

- 1550 nm
- 3 km
- 1.25 G
- BiDi
- 100M ETH
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Simplex UPC |
Interface | Singlemode BiDi |
Compliance Code | BiDi LX |
Operating Temperature | Standard |
Modulation | NRZ |
Distance | 3 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 125 Mbit/s - 1.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 1 W |
CDR | none |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 9 dB |
Transmit min/max per lane | -14 dBm / -8 dBm |
Receiver min/max per lane | -23 dBm / -3 dBm (overload) @1G |
Wavelength TX (Typical) | 1550 nm |
Wavelength TX (Range) | 1480 - 1580 nm |
---|---|
Wavelength RX (Typical) | 1310 nm |
Wavelength RX (Range) | 1260 - 1600 nm |
Laser | FP |
Receiver Type | PIN |
Modulation | NRZ @1G |
Extinction Ratio | 6 dB |
Supported Protocols | 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems GLC-BX-D compatible
- Fortinet FG-TRAN-LX compatible
- Juniper EX-SFP-GE10KT15R13 compatible
- MikroTik S-53LC20D compatible
- Netgear AGM732F compatible
- Planet MGB-LB10 compatible
- Siemens SFP992-1LD compatible
- TP-LINK TL-SM311LS compatible
- Ubiquiti Networks UF-SM-1G-S BD compatible
What customers say
I have received my orders from them in blistering speed. Happy to the nth degree.
Spending a few minutes of my time, first and foremost expressing how much I’m impressed by your friendliness, is the least I can do. Friendliness was followed by super-fast order processing and delivery. In a few words, unboxing and using your FLEXBOX is an utterly awesome experience. As in brilliant. Also saving us loads of time ordering optics. In addition to all of this – you deliver particular good build quality, too. You’ve got me impressed, thank you!
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.