1G SFP BiDi LX Industrial 3 km, ᵀˣ1550 / ᴿˣ1310 nm, DDM, LC-Simplex, Singlemode
- 1550 nm
- 3 km
- 1.25 G
- Industrial
- 100M ETH
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi LX |
| Operating Temperature | Industrial |
| Distance | 3 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 125 Mbit/s - 1.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 9 dB |
| Transmit min/max per lane | -14 dBm / -8 dBm |
| Receiver min/max per lane | -23 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1480 - 1580 nm |
| Wavelength RX (Typical) | 1310 nm |
|---|---|
| Wavelength RX (Range) | 1260 - 1600 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Extinction Ratio | 6 dB |
| Supported Protocols | 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Alcatel-Lucent Ent. SFP-GIG-LX compatible
- Brocade / Ruckus E1MG-BXD compatible
- Cisco Systems GLC-BX-D compatible
- Fortinet FG-TRAN-LX compatible
- Juniper EX-SFP-GE10KT15R13 compatible
- OpenGear 569025 compatible
What customers say
I had the chance to flash my first transceiver with the FLEXBOX and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the FLEXBOX. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my FLEXBOX for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.