1G SFP BiDi EX 40 km, ᵀˣ1310 / ᴿˣ1550 nm, DDM, LC-Simplex, Singlemode
- 1310 nm
- 40 km
- 1.25 G
- BiDi
- 100M ETH
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi EX |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 125 Mbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 19 dB |
| Transmit min/max per lane | -5 dBm / 0 dBm |
| Receiver min/max per lane | -24 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1260 - 1360 nm |
|---|---|
| Wavelength RX (Typical) | 1550 nm |
| Wavelength RX (Range) | 1470 - 1600 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Accedian Networks 7ST-004 compatible
- ADTRAN 1442140G2 compatible
- ADVA 0061003012 compatible
- Advantech SFP-GWDM13SC-40E compatible
- Allied Telesis AT-SPBD40-13 compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) J4859C compatible
- Brocade / Ruckus E1MG-BXU compatible
- Ciena XCVR-A40U31 compatible
- Cisco Systems GLC-BX40-U-I compatible
- Coriant (ex. Tellabs) 82.S1GBEBX1133S compatible
- D-LINK DEM-331R compatible
- Edge Core ET4204-BX10 compatible
- Extreme (ex. Enterasys) MGBIC-BX40-U compatible
- Extreme 10057 compatible
- FibroLAN SF1G-LF13 compatible
- Fortinet FG-TRAN-LX compatible
- Fortinet FN-TRAN-LX compatible
- Hirschmann M-SFP-BIDI Type B LH/LC compatible
- Huawei SFP-GE-LX-SM1310-BIDI compatible
- Infinera (ex. Transmode) TRX100081 compatible
- Intel SFP BIDI 1310 compatible
- Juniper EX-SFP-GE40KT13R15 compatible
- Juniper NS-SFP-1GE-LX compatible
- Korenix SFPGLX40B13D compatible
- LevelOne SFP-9421 compatible
- Marconi SU57AE compatible
- Moxa SFP-1G40ALC compatible
- MRV SFP-GD-BD35 compatible
- Net Insight NPA0012-L101 compatible
- Nexans 88646133 compatible
- Nokia (ex. Alcatel-Lucent) 1AB393080009 compatible
- Nokia (ex. Alcatel-Lucent) 3FE28785AA compatible
- Nokia (ex. Alcatel-Lucent) SFP-GIG-BX-U compatible
- Nokia-Siemens (ex. Atrica) AT10078-0D-R compatible
- Palo Alto Networks PAN-SFP-LX compatible
- Planet MGB-LA40 compatible
- RAD SFP-23A compatible
- Raisecom USFP-GB/SS354-DL compatible
- Sophos ASG0000LX compatible
- TP-LINK TL-SM321B compatible
- Transition Networks TN-SFP-LXB41 compatible
- TRENDnet TEG-MGBS10D3 compatible
- TRENDnet TEG-MGBS40D3 compatible
- Ubiquiti Networks UF-SM-1G-S BU compatible
- Westermo 1100-0568 compatible
- Zyxel SFP-BX1310-40 compatible
What customers say
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
We are using FLEXOPTIX industrial grade transceivers in our control systems for power electronics and converters. The FLEXBOX is an invaluable tool, making it super easy and quick to configure transceivers. Even larger numbers can be configured easily with the batch configure option, just plug them in one after the other and the rest happens automatically. The power meter, source control and OTDR features are helpful for lab testing or during commissioning. Thanks, FLEXOPTIX for providing universal transceivers of a high quality at decent prices! Your lightning-fast order processing and shipping speed is also impressive.
Woa, i can get next day delivery for any vendor. That’s a game changer. Also thanks for making it a smartphone app, this fits my workflow well.
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.