4G Fibre Channel SFP CWDM ~40 km / 18 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
- CWDM
- ~40 km / 18 dB
- 4.25 G
- 1G ETH
- 1G FC
- 2G FC
- 4G FC
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | CWDM |
Type | 4G FC LW |
Distance | 40 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 1.05 Gbit/s - 4.25 Gbit/s |
Digital Diagnostic Management (DDM) | Internally Calibrated |
---|---|
Power Consumption | 1 W |
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 18 dB |
Transmit min/max per lane | 0 dBm / 5 dBm |
Receiver min/max per lane | -18 dBm / -3 dBm (overload) |
Wavelength TX (Typical) | Channel R - 1610 nm |
---|---|
Wavelength RX (Range) | 1260 - 1620 nm |
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ |
Transmit and Dispersion Penalty | 1 dB |
Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 0061702698 compatible
- Brocade XBR-000146 compatible
- Brocade XBR-000174 compatible
- Ciena (ex. Nortel) NTK593TBE6 compatible
- Cisco Systems DS-CWDM4G1610 compatible
- HP Storage (B-Series) AN211A compatible
- HP Storage (C-Series) AG860A compatible
- Infinera (ex. Transmode) TRX100045/08 compatible
- Juniper (ex BTI Systems) BP3AM1CJ compatible
- MRV SFPFC4CW01-61 compatible
- Packetlight UL-CWM-4G-FC-S-CH1610 compatible
- smartoptics SFP-4GFC-50D-C61 compatible
- Transition Networks TN-SFP-FC4XS-C61 compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.