3G SDI Video SFP, 100 GHz Grid - C-Band DWDM 100 km / 28 dB, DDM, LC-Duplex

Universal SDI SFP Transceiver - 100 GHz Grid - C-Band
Use FLEXBOX to configure to almost any vendor
DWDM for multiple applications over one duplex fiber
Supported Data Rates: 270 Mbit/s - 2.97 Gbit/s
Powerbudget of 28 dB for up to 100 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
  • DWDM 100 GHz
  • 100 km
  • 2.97 G
  • pl_video Video
Protocols
  • 3G SDI
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.1630.28.yyD

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface DWDM
Compliance Code 3G SDI
Operating Temperature Standard
Modulation NRZ
Distance 100 km
Temperature Range 0°C - 70°C
Bandwidth 270 Mbit/s - 2.97 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 28 dB
Transmit min/max per lane 0 dBm / 3 dBm
Receiver min/max per lane -28 dBm / -8 dBm (overload) @3G
Wavelength TX (Typical) Channel 61 - 1528.77 nm
Wavelength RX (Range) 1270 - 1610 nm
Laser DFB
Receiver Type APD
Modulation NRZ @3G
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 5 dB
Supported Protocols 3G SDI

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

Working with the FLEXOPTIX Transceivers and FLEXBOX is not only uncomplicated but offers us the possibility of working with many vendor types to support the different campus networks. Thanks guys - awesome work.

Brian Masiga Network Engineer / Research and Education Network for Uganda

Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.

Christian Brasolin Senior System Engineer / Netica SRL

The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!

We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.

The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.

The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.

Tim Waterham ICT Infrastructure Engineer / Wyre Borough Council

We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done.  Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs  to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!

Nick Derksen Infrastructure Engineer / Previder B.V
More