3G Video SDI SFP 50 km, λ1550 nm, DDM, LC-Duplex, Singlemode

- 1550 nm
- 50 km
- 2.97 G
- Video
- 3G SDI
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | 3G SDI |
Operating Temperature | Standard |
Modulation | NRZ |
Distance | 50 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 270 Mbit/s - 2.97 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 0.65 W |
CDR | none |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 22 dB |
Transmit min/max per lane | 0 dBm / 3 dBm |
Receiver min/max per lane | -22 dBm / -20 dBm (overload) @3G |
Wavelength TX (Typical) | 1550 nm |
Wavelength TX (Range) | 1530 - 1570 nm |
---|---|
Wavelength RX (Typical) | 1550 nm |
Wavelength RX (Range) | 1260 - 1620 nm |
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ @3G |
Extinction Ratio | 7.5 dB |
Supported Protocols | 3G SDI |
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
The FLEXBOX has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the FLEXBOX was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the FLEXBOX in the future! :)
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The FLEXBOX is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!