100G QSFP28 Coherent Tunable DWDM with FEC ZR with dual CDR 120 km, C-Band, LC-Duplex, Singlemode

- Coherent DWDM
- 120 km
- 106.25 G
- Tunable
- 100G ETH
Specification
Form Factor | QSFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode DWDM |
Compliance Code | ZR |
Operating Temperature | Standard |
Modulation | DP-DQPSK 100G |
Distance | 120 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 106.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 5 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | Yes, KP4, KR |
Powerbudget (dB) | 21 dB |
Transmit min/max per lane | -11 dBm / -9 dBm |
Receiver min/max per lane | -30 dBm / 3 dBm (overload) @100G |
Wavelength TX (Typical) | tunable Coherent DWDM |
TX Tunable Range | 1528.77 - 1567.13 nm |
---|---|
Wavelength RX (Range) | 1528.8 - 1567.1 nm |
Laser | EML |
Receiver Type | Coherent |
Modulation | DP-DQPSK 100G @100G |
Transmit and Dispersion Penalty | 1 dB |
Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party 100GBASE-LR compatible
- Arista QSFP-100G-LR compatible
- Cisco Systems QSFP-100G-LR-S compatible
- Juniper QSFP-100G-LR compatible
- Nokia (ex. Alcatel-Lucent) 3HE16557AA compatible
- ADVA 1061800750-01 compatible
What customers say
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The FLEXBOX is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.