100G QSFP28 SWDM4 with dual CDR 100 m, λ850-940 nm, LC-Duplex, Multimode
- int. Mux
- 100 m
- 103.12 G
- LC
- 100G ETH
Hardware Restrictions
For your customer account, we have a restriction to a specific Series for this product which may affect leadtime.
You'll automatically receive the listed hardware, as soon as the hardware is available.
If you'd like to receive another hardware, you can add a comment during checkout.
The availability of the Series changes quite fast and may not be correct. It's just an indication.
| Series | Reason | Ticket Number |
|---|
Just go to cart and click CREATE QUOTE.
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Multimode |
| Compliance Code | SWDM4 |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 100 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 103.12 Gbit/s |
|---|---|
| Bandwidth Per Lane | 25.78 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 4 dB |
| Transmit min/max per lane | -5.5 dBm / -6.5 dBm |
| Receiver min/max per lane | -9.5 dBm / 3.4 dBm (overload) @100G |
|---|---|
| Wavelength TX (Typical) | 850 nm, 880 nm, 910 nm, 940 nm |
| Wavelength RX (Typical) | 850 nm, 880 nm, 910 nm, 940 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | NRZ @100G |
| Extinction Ratio | 2 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Juniper JNP-QSFP-100G-SR4 compatible
- Juniper QSFP-100G-SR4-T2 compatible
- Juniper QSFP-100GBASE-SR4 compatible
- MikroTik XQ+85MP01D compatible
What customers say
FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.
Extensive list of supported vendors.
Your product is like a Swiss Army Knife that all Engineers should have!!
Great Job and keep it up!
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Your FLEXBOX rocks. On our Linux workstations we can easily change the vendor and thus save costs. In addition, we are also convinced by the product quality, the support and the handling of the order. Thank you!