10G SFP+ BiDi ZR Industrial 60 km, ᵀˣ1270 / ᴿˣ1330 nm, LC-Simplex, Singlemode
- 1270 nm
- 60 km
- 11 G
- Industrial
- 10G ETH
- 10G FC
- 1G ETH
- 1G FC
- 8G FC
- CPRI
- OBSAI
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP+ |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi ZR |
| Operating Temperature | Industrial |
| Distance | 60 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 614 Mbit/s - 11 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 1.5 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 21 dB |
| Transmit min/max per lane | 1 dBm / 6 dBm |
| Receiver min/max per lane | -20 dBm / -6 dBm (overload) @10G |
| Wavelength TX (Typical) | 1270 nm |
| Wavelength TX (Range) | 1260 - 1280 nm |
| Wavelength RX (Typical) | 1330 nm |
|---|---|
| Wavelength RX (Range) | 1320 - 1340 nm |
| Laser | DFB |
| Receiver Type | APD |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 2 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 1G Fibre Channel, 8G Fibre Channel, Gigabit Ethernet, LTE 0.614G CPRI, LTE 0.768G OBSAI, LTE 1.22G CPRI, LTE 1.536G OBSAI, LTE 2.458G CPRI, LTE 3.072G OBSAI, LTE 4.915G CPRI, LTE 6.144G CPRI, LTE 6.144G OBSAI, LTE 7.373G CPRI, LTE 9.830G CPRI |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 1061702595-02 compatible
- Cisco Systems SFP-10G-BXU-I compatible
- Huawei OSX010N30 (34060742) compatible
- Juniper JNP-SFP-10G-BX40U compatible
- Juniper SFP-10GE-ZR compatible
- Juniper SFPP-10GE-BX40U-IT compatible
- Nokia (ex. Alcatel-Lucent) 3FE55743AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE18110AA compatible
What customers say
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.