10G SFP+, 50 GHz Grid - C-Band DWDM ER Industrial 40 km / 14 dB, LC-Duplex

- DWDM 50 GHz
- 40 km
- 11.3 G
- Industrial
- 10G ETH
- 10G FC
- 1G ETH
- 8G FC
- CPRI
- OBSAI
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP+ |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | DWDM |
Compliance Code | DWDM ER |
Operating Temperature | Industrial |
Modulation | NRZ |
Distance | 40 km |
Temperature Range | -40°C - 85°C |
Bandwidth | 600 Mbit/s - 11.3 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 1.8 W |
CDR | none |
Inbuilt FEC | No |
Powerbudget (dB) | 14 dB |
Transmit min/max per lane | -1 dBm / 4 dBm |
Receiver min/max per lane | -15 dBm / -1 dBm (overload) @10G |
Wavelength TX (Typical) | Channel 595 - 1529.94 nm |
Wavelength RX (Range) | 1260 - 1620 nm |
Laser | EML |
---|---|
Receiver Type | PIN |
Modulation | NRZ @10G |
Transmit and Dispersion Penalty | 2 dB |
Chromatic Dispersion Tolerance | -300 ps/nm to 800 ps/nm @10G |
Extinction Ratio | 3.5 dB |
Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, Gigabit Ethernet, LTE 0.614G CPRI, LTE 0.768G OBSAI, LTE 1.22G CPRI, LTE 1.536G OBSAI, LTE 2.458G CPRI, LTE 3.072G OBSAI, LTE 4.915G CPRI, LTE 6.144G CPRI, LTE 6.144G OBSAI, LTE 7.373G CPRI, LTE 9.830G CPRI |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver.
Formerly a System & Network Engineer at the service of French Academic and Research Network and currently developing my own IT services business, I have been a strong advocate of FLEXOPTIX "one-SFP-fits-all" approach since 2015!
Having purchased close to 1500 optics over the last few years for different kinds of projects (Metropolitan & Campus Networks, Datacenter, Nexans FTTO projects), I have always been completely satisfied with FLEXOPTIX products.
I have had the opportunity to test several competing solutions and for me "FLEXBOX" is by far the most advanced in terms of functionality, ease of use and compatibility.
Beyond the flawless technical aspects, the many human qualities of the different people I have had the opportunity to exchange with are a priceless advantage: sympathy, reactivity, impressive know-how, infallible logistics and after-sales services, FLEXOPTIX is a company you enjoy working with and you can trust one hundred percent.
Thanks a lot guys!
The FLEXBOX has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the FLEXBOX was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the FLEXBOX in the future! :)