6G SDI Video SFP+ CWDM ~40 km / 17 dB, 1270 nm - 1610 nm, LC-Duplex

Universal SDI SFP+ Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
Supported Data Rates: 270 Mbit/s - 5.94 Gbit/s
Powerbudget of 17 dB for up to 40 km using an OS2 ITU-T G.652 fiber
Specs
  • CWDM
  • ~40 km / 17 dB
  • 5.94 G
  • pl_video Video
Protocols
  • 6G SDI
Request compatibility
Part number
P.1660.14.xPS
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Matching Products

LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
49 pcs in stock 94.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR

Specification

Form Factor SFP+
Connector / Polish LC-Duplex PC
Interface CWDM
Type CWDM 6G SDI
Distance 40 km
Temperature Range 0°C - 70°C
Bandwidth 270 Mbit/s - 5.94 Gbit/s
Digital Diagnostic Management (DDM) Internally Calibrated
Power Consumption 1.2 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 17 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -17 dBm / 0.5 dBm (overload)
Wavelength TX (Typical) Channel R - 1610 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser DFB
Receiver Type PIN
Modulation NRZ
Extinction Ratio 3.5 dB
Supported Protocols 6G SDI

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Christian Seitz Head of Network, STRATO AG
Now that I’m done configuring my equipment, I use FLEXBOX to impress associates. I’m an IT Hero just for the savings, not to mention the FLEXibility to stock one type for each adapter. Keep up the good work!
Nikos Papandreou Dipl. Civil Engineer acting as IT Admin/SQL Dev, Geitonas School SA
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen Infrastructure Engineer, Previder B.V
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!
Michael Nicolaou Senior Network Consultant, CDMA Services Ltd
More