16G Fibre Channel SFP+, 50 GHz Grid - C-Band DWDM with dual CDR 40 km / 14 dB, LC-Duplex
- DWDM 50 GHz
- 40 km
- 14.03 G
- Dual CDR
- 16G FC
- 4G FC
- 8G FC
Specification
| Form Factor | SFP+ |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | DWDM |
| Compliance Code | 16G FC LW |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 40 km |
| Temperature Range | -5°C - 70°C |
| Bandwidth | 4.25 Gbit/s - 14.03 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 2 W |
| CDR | TX and RX |
| Inbuilt FEC | No |
| Powerbudget (dB) | 14 dB |
| Transmit min/max per lane | 0 dBm / 4 dBm |
| Receiver min/max per lane | -14 dBm / 0 dBm (overload) @16G |
| Wavelength TX (Typical) | Channel 595 - 1529.94 nm |
|---|---|
| Wavelength RX (Range) | 1260 - 1565 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | NRZ @16G |
| Transmit and Dispersion Penalty | 2 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 16G Fibre Channel, 4G Fibre Channel, 8G Fibre Channel |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA # compatible
- Brocade XBR-000258 compatible
- Cisco Systems # compatible
- Infinera (ex. Transmode) 98Y2178 compatible
- Packetlight # compatible
- QLogic SFP16-LR-SP compatible
What customers say
The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN. Thank you FLEXOPTIX
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!