16G Fibre Channel SFP+, 100 GHz Grid - C-Band DWDM with dual CDR 40 km / 14 dB, LC-Duplex

- DWDM 100 GHz
- 40 km
- 14.03 G
- Dual CDR
- 16G FC
- 4G FC
- 8G FC
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP+ |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | DWDM |
Compliance Code | 16G FC LW |
Operating Temperature | Standard |
Modulation | NRZ |
Distance | 40 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 4.25 Gbit/s - 14.03 Gbit/s |
---|---|
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 2 W |
CDR | TX and RX |
Inbuilt FEC | No |
Powerbudget (dB) | 14 dB |
Transmit min/max per lane | 0 dBm / 4 dBm |
Receiver min/max per lane | -14 dBm / 0 dBm (overload) @16G |
Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
---|---|
Wavelength RX (Range) | 1260 - 1565 nm |
Laser | EML |
Receiver Type | PIN |
Modulation | NRZ @16G |
Transmit and Dispersion Penalty | 2 dB |
Extinction Ratio | 8.2 dB |
Supported Protocols | 16G Fibre Channel, 4G Fibre Channel, 8G Fibre Channel |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Brocade XBR-000258 compatible
- HP Storage (B-Series) QK725A compatible
- Infinera (ex. Transmode) TRX100145/961 compatible
- Packetlight # compatible
- QLogic SFP16-LR-SP compatible
What customers say
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Formerly a System & Network Engineer at the service of French Academic and Research Network and currently developing my own IT services business, I have been a strong advocate of FLEXOPTIX "one-SFP-fits-all" approach since 2015!
Having purchased close to 1500 optics over the last few years for different kinds of projects (Metropolitan & Campus Networks, Datacenter, Nexans FTTO projects), I have always been completely satisfied with FLEXOPTIX products.
I have had the opportunity to test several competing solutions and for me "FLEXBOX" is by far the most advanced in terms of functionality, ease of use and compatibility.
Beyond the flawless technical aspects, the many human qualities of the different people I have had the opportunity to exchange with are a priceless advantage: sympathy, reactivity, impressive know-how, infallible logistics and after-sales services, FLEXOPTIX is a company you enjoy working with and you can trust one hundred percent.
Thanks a lot guys!