12G UHD Video SDI SFP+ with dual CDR 10 km, λ1310 nm, LC-Duplex, Singlemode
- 1310 nm
- 10 km
- 11.88 G
- Video
- 12G UHD SDI
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP+ |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | 12G UHD SDI |
Distance | 10 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 270 Mbit/s - 11.88 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1.5 W |
---|---|
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 5.8 dB |
Transmit min/max per lane | -8.2 dBm / 2 dBm |
Receiver min/max per lane | -14 dBm / 0.5 dBm (overload) @12G |
Wavelength TX (Typical) | 1310 nm |
Wavelength TX (Range) | 1260 - 1355 nm |
---|---|
Wavelength RX (Typical) | 1310 nm |
Wavelength RX (Range) | 1260 - 1620 nm |
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ @12G |
Extinction Ratio | 3.5 dB |
Supported Protocols | 12G UHD SDI |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!