800G Closed-Top OSFP 2x VR4 with dual CDR 50 m, 8x λ850 nm, MTP/MPO-8/12 APC, Multimode
- 8x 850 nm
- 50 m
- 2x 425 G
- MTP/MPO-8/12
- 2x 400G ETH
- 400G ETH
- 800G ETH
- 8x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | OSFP |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | 2x MTP/MPO-8/12 APC |
| Interface | Multimode |
| Compliance Code | 2x VR4 |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 50 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 425 Gbit/s |
|---|---|
| Bandwidth Per Lane | 106.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 15 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 1.7 dB |
| Transmit min/max per lane | -4.5 dBm / 4 dBm |
| Receiver min/max per lane | -6.2 dBm / 4 dBm (overload) @400G |
| Wavelength TX (Typical) | 8x 850 nm |
|---|---|
| Wavelength TX (Range) | 842 - 948 nm |
| Wavelength RX (Typical) | 8x 850 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 4.4 dB |
| Extinction Ratio | 2.5 dB |
| Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 8x 100G Ethernet, 400G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
Extensive list of supported vendors.
Your product is like a Swiss Army Knife that all Engineers should have!!
Great Job and keep it up!
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The FLEXBOX is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!