800G Finned-Top OSFP 2x VR4 with dual CDR 50 m, 8x λ850 nm, MTP/MPO-8/12 APC, Multimode
- 8x 850 nm
- 50 m
- 2x 424.8 G
- MTP/MPO-8/12
- 2x 400G ETH
- 400G ETH
- 800G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | OSFP |
|---|---|
| OSFP Variant | Finned-Top |
| Connector / Polish | 2x MTP/MPO-8/12 APC |
| Interface | Multimode |
| Compliance Code | 2x VR4 |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 50 m |
| Temperature Range | 15°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 424.8 Gbit/s |
|---|---|
| Bandwidth Per Lane | 106.2 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 16 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 1.7 dB |
| Transmit min/max per lane | -4.6 dBm / 4 dBm |
| Receiver min/max per lane | -6.3 dBm / 4 dBm (overload) @400G |
| Wavelength TX (Typical) | 8x 850 nm |
|---|---|
| Wavelength TX (Range) | 842 - 948 nm |
| Wavelength RX (Typical) | 8x 850 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 4.4 dB |
| Extinction Ratio | 2.5 dB |
| Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 400G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Nvidia (ex. Mellanox) MMA4Z00-NS compatible
What customers say
Since we ordered a FLEXBOX, our life as definitly changed.
There’s a before and an after FLEXBOX.
So many vendors in the compatibility matrice, so easy way to configure the module!
And the cables and accessories came also with quality.
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The FLEXBOX is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!