800G Finned-Top OSFP 2x SR4 with dual CDR 100 m, 8x λ850 nm, MTP/MPO-8/12 APC, Multimode

- 8x 850 nm
- 100 m
- 2x 425 G
- MTP/MPO-8/12
- 2x 400G ETH
- 2x 400G NDR
- 400G ETH
- 800G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | OSFP |
---|---|
Connector / Polish | 2x MTP/MPO-8/12 APC |
Interface | Multimode |
Compliance Code | 2x SR4 |
Distance | 100 m |
Temperature Range | 0°C - 70°C |
Lane Count | 8x (Tx/Rx) |
Bandwidth | 2x 425 Gbit/s |
Bandwidth Per Lane | 106.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 14 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 1.8 dB |
Transmit min/max per lane | -4.6 dBm / 4 dBm |
Receiver min/max per lane | -6.4 dBm / 4 dBm (overload) @400G |
Wavelength TX (Typical) | 8x 850 nm |
Wavelength TX (Range) | 844 - 863 nm |
---|---|
Wavelength RX (Typical) | 8x 850 nm |
Laser | VCSEL |
Receiver Type | PIN |
Modulation | PAM4 @400G |
Extinction Ratio | 2.5 dB |
Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 800G Infiniband (2xNDR), 400G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Nvidia (ex. Mellanox) MMA4Z00-NS compatible
What customers say
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver.
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.