400G OSFP112 DR4 with dual CDR 500 m, 4x λ1311 nm, MTP/MPO-8/12 APC, Singlemode
- 4x 1311 nm
- 500 m
- 425 G
- MTP/MPO-8/12
- 400G ETH
- 400G NDR
- 4x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | OSFP112 |
|---|---|
| Connector / Polish | MTP/MPO-8/12 APC |
| Interface | Singlemode |
| Compliance Code | DR4 |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 500 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 425 Gbit/s |
| Bandwidth Per Lane | 106.25 Gbit/s |
|---|---|
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 9 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 1.5 dB |
| Transmit min/max per lane | -2.9 dBm / 4 dBm |
| Receiver min/max per lane | -4.4 dBm / 4 dBm (overload) @400G |
| Wavelength TX (Typical) | 4x 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
|---|---|
| Wavelength RX (Typical) | 4x 1311 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 400G Infiniband NDR, 4x 100G Ethernet, 400G Ethernet |
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Nvidia (ex. Mellanox) MMS4X00-NS400 compatible
What customers say
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.
Great. FLEXBOX does what it says on the tin! - just connect, configure Transceiver and be happy.
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.
For years we struggled with hundreds of transceivers from different vendors but this is finally over!
With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.