2x 50G QSFP28 SR2 with dual CDR 100 m, 2x λ850 nm, CS-Duplex, Multimode
- int. Mux
- 100 m
- 2x 53.13 G
- CS
- 100G ETH
- 50G ETH
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | 2x CS-Duplex UPC |
| Interface | Multimode |
| Compliance Code | 2x SR2 |
| Distance | 100 m |
| Temperature Range | 20°C - 60°C |
| Lane Count | 2x (Tx/Rx) |
| Bandwidth | 2x 53.13 Gbit/s |
| Bandwith Per Lane | 53.13 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 2.5 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 5 dB |
| Transmit min/max per lane | -1 dBm / 3 dBm |
| Receiver min/max per lane | -6 dBm / 3 dBm (overload) @50G |
| Wavelength TX (Typical) | 2x 850 nm |
| Wavelength TX (Range) | 840 - 860 nm |
|---|---|
| Wavelength RX (Typical) | 2x 850 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | PAM4 @50G |
| Transmit and Dispersion Penalty | 4.5 dB |
| Extinction Ratio | 3.4 dB |
| Supported Protocols | 100G Ethernet, 50G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party QSFP-100G-SR4 compatible
- Arista QSFP-100G-SR4 compatible
- Cisco Systems QSFP-100G-SR4-S compatible
- Extreme 100G-SR4-QSFP100M compatible
- Extreme 10401 compatible
- Juniper JNP-QSFP-100G-SR4 compatible
- Juniper QSFP-100G-SR4-T2 compatible
- Juniper QSFP-100GBASE-SR4 compatible
What customers say
You guys rock! I have had the opportunity to use the previous version of FLEXBOX with my previous company. I cannot believe the progress you have made just in a year. Battery pack? Mobile reconfiguration? I am truly feeling lucky to have met you guys at Cloudfest. I will be honoured to demonstrate your products to startups as great examples to contribute to tech sustainability.
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!