400G Finned-Top OSFP DR4+ with dual CDR 2 km, 4x λ1310 nm, MTP/MPO-8/12 APC, Singlemode
- 4x 1310 nm
- 2 km
- 425 G
- MTP/MPO-8/12
- 100G ETH
- 400G ETH
- 4x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | OSFP |
---|---|
Connector / Polish | MTP/MPO-8/12 APC |
Interface | Singlemode |
Compliance Code | DR4+ |
Distance | 2 km |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 425 Gbit/s |
Bandwith Per Lane | 106.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 12 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | Yes, KP4 |
Powerbudget (dB) | 6.2 dB |
Transmit min/max per lane | -0.2 dBm / 4.2 dBm |
Receiver min/max per lane | -6.4 dBm / 4.5 dBm (overload) @400G |
Wavelength TX (Typical) | 4x 1310 nm |
Wavelength TX (Range) | 1304.5 - 1317.5 nm |
---|---|
Wavelength RX (Typical) | 4x 1310 nm |
Laser | EML |
Receiver Type | PIN |
Modulation | PAM4 @400G |
Transmit and Dispersion Penalty | 3.4 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 4x 100G Ethernet, 400G Ethernet, 100G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party OSFP-400G-XDR4-S compatible
- Arista OSFP-400G-XDR4-S compatible
What customers say
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.