200G QSFP-DD SR8 with dual CDR 100 m, 8x λ850 nm, MTP/MPO-16 APC, Multimode
- 8x 850 nm
- 100 m
- 206.25 G
- 100G ETH
- 200G ETH
Just go to cart and click CREATE QUOTE.
|Connector / Polish||MTP/MPO-16 APC|
|Temperature Range||0°C - 70°C|
|Lane Count||8x (Tx/Rx)|
|Bandwith Per Lane||25.78 Gbit/s|
|Digital Diagnostic Management (DDM)||Yes, internally calibrated|
|Power Consumption||5 W|
|CDR||TX and RX|
|Powerbudget (dB)||0.9 dB|
|Transmit min/max per lane||-8.4 dBm / 2.4 dBm|
|Receiver min/max per lane||-9.3 dBm / 2.4 dBm (overload)|
|Wavelength TX (Typical)||8x 850 nm|
|Wavelength TX (Range)||840 - 860 nm|
|Wavelength RX (Typical)||8x 850 nm|
|Extinction Ratio||3 dB|
|Supported Protocols||200G Ethernet, 100G Ethernet|
Configure Transceiver Using Your FLEXSOXIt's that easy to use
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.