800G QSFP-DD 2x FR4 with dual CDR 2 km, λ1271-1331 nm, LC-Duplex, Singlemode
- int. Mux
- 2 km
- 2x 425 G
- LC
- 2x 400G ETH
- 400G ETH
- 800G ETH
Specification
| Form Factor | QSFP-DD |
|---|---|
| Connector / Polish | 2x LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | 2x FR4 |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 2 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 425 Gbit/s |
|---|---|
| Bandwidth Per Lane | 106.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 14 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 1.4 dB |
| Transmit min/max per lane | -3.2 dBm / 4.4 dBm |
| Receiver min/max per lane | -4.6 dBm / 4.4 dBm (overload) @400G |
|---|---|
| Wavelength TX (Typical) | 1271 nm, 1271 nm, 1291 nm, 1291 nm, 1311 nm, 1311 nm, 1331 nm, 1331 nm |
| Wavelength RX (Typical) | 1271 nm, 1271 nm, 1291 nm, 1291 nm, 1311 nm, 1311 nm, 1331 nm, 1331 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 400G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.
Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver.
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.