800G QSFP-DD800 LR8 with dual CDR 10 km, 8x λ1311 nm, MTP/MPO-16 APC, Singlemode

Universal QSFP-DD800 Transceiver
Use FLEXBOX to configure to almost any vendor
For 800GBASE-LR8 Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 850 Gbit/s (8x 106.25 Gbit/s)
Up to 10 km via Singlemode OS2
Use ONLY with MTP/MPO-16 APC connectors
Specs
  • 8x 1311 nm
  • 10 km
  • 850 G
  • MTP/MPO-16
Protocols
  • 100G ETH
  • 400G ETH
  • 800G ETH
  • 8x 100G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
D.138HG.10.M:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Power Budget
800G QSFP-DD800 DR8 with dual CDR 500 m, 8x λ1311 nm, MTP/MPO-16 APC, Singlemode 
800G QSFP-DD800 DR8 with dual CDR | 500 m, 8x λ1311 nm, MTP/MPO-16 APC, Singlemode
13 pcs in stock As low as 2,375.95 EUR
MTP® APC to 8x LC-Duplex Singlemode Breakout cable 16 Cores, MPO compliant, A1 9/125 µm, yellow, 0.5 m - 100 m 
MTP® APC to 8x LC-Duplex Singlemode Breakout cable | 16 Cores, MPO compliant, A1 9/125 µm, yellow, 0.5 m - 100 m
As low as 214.87 EUR
LWL Fibre Cleaner IBC MPO/MTP-16  
LWL Fibre Cleaner IBC MPO/MTP-16
11 pcs in stock 134.85 EUR

Specification

Form Factor QSFP-DD800
Connector / Polish MTP/MPO-16 APC
Interface Singlemode
Compliance Code LR8
Distance 10 km
Temperature Range 0°C - 70°C
Lane Count 8x (Tx/Rx)
Bandwidth 850 Gbit/s
Bandwith Per Lane 106.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 16 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 6.3 dB
Transmit min/max per lane -1.4 dBm / 4.5 dBm
Receiver min/max per lane -7.7 dBm / 4.5 dBm (overload) @800G
Wavelength TX (Typical) 8x 1311 nm
Wavelength TX (Range) 1304.5 - 1317.5 nm
Wavelength RX (Typical) 8x 1311 nm
Laser EML
Receiver Type PIN
Modulation PAM4 @800G
Transmit and Dispersion Penalty 3.4 dB
Extinction Ratio 4.5 dB
Supported Protocols 800G Ethernet, 8x 100G Ethernet, 400G Ethernet, 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.

Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models

now I can operate and adapt to each on site production.

Emilio Vargas Production Manager / Liga ACE esports
Great products. When you hold them in your hands, you see the care for qualitiy and product details. I strongly recommend Flexoptix' products.
Dariusz Siedlecki Nettec
Since we ordered a FLEXBOX, our life as definitly changed. There’s a before and an after FLEXBOX. So many vendors in the compatibility matrice, so easy way to configure the module! And the cables and accessories came also with quality.
Stéphane Gouron Directeur Agence Ouest, S-cube.
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.
Adam Montgomery Necto Inc
More