1G SFP SX SGMII 2 km, λ1310 nm, DDM, LC-Duplex, Multimode

Universal SFP Transceiver
Use FLEXBOX to configure to almost any vendor
For 1000BASE-SX Ethernet links
Leverage SMGII to support Fast Ethernet on 1 Gigabit devices
Supported Data Rates: 125 Mbit/s - 1.25 Gbit/s
Up to 2 km via Multimode OM3
LC-Duplex Connector
Digital Diagnocstic Monitoring (DDM)
Specs
  • 1310 nm
  • 2 km
  • 1.25 G
Protocols
  • 100M ETH
  • 1G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.1312.2M.DG:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface Multimode
Compliance Code SX SGMII
Distance 2 km
Temperature Range 0°C - 70°C
Bandwidth 125 Mbit/s - 1.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII Yes
Inbuilt FEC No
Powerbudget (dB) 10.5 dB
Transmit min/max per lane -11.5 dBm / -3 dBm
Receiver min/max per lane -22 dBm / -3 dBm (overload) @1G
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1260 - 1360 nm
Wavelength RX (Typical) 1310 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser FP
Receiver Type PIN
Modulation NRZ @1G
Extinction Ratio 9 dB
Supported Protocols Fast Ethernet, Gigabit Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Nokia (ex. Alcatel-Lucent) 3HE04116AA compatible
  • Siemens 6GK6000-8FE50-0AA0 compatible
Your vendor / compatibility is missing?

What customers say

I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.

Thank you for such a great product.

Stefan Kirbes System Administrator / INTERCOM Austria GmbH
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.

We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.

Axel Hauguel CEO / Dyjix
FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.
Otto Lodewijk Director, SuitIT
More