100M SFP EX 40 km, λ1310 nm, DDM, LC-Duplex, Singlemode
- 1310 nm
- 40 km
- 155 M
- 100M ETH
- STM-1
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | EX |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 125 Mbit/s - 155 Mbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 29 dB |
| Transmit min/max per lane | -5 dBm / 0 dBm |
| Receiver min/max per lane | -34 dBm / -10 dBm (overload) @100M - 800M |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1260 - 1360 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @100M - 800M |
| Extinction Ratio | 10 dB |
| Supported Protocols | Fast Ethernet, STM-1 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1184543P1 compatible
- ADTRAN 1184543PG1 compatible
- ADVA 0061003003 compatible
- Advantech SFP-FXS/LC-30E compatible
- Alcatel-Lucent Ent. SFP-100-SM40 compatible
- Allied Telesis AT-SPFX40 compatible
- Barnfind BTSFP-LX-SM-0140 compatible
- Brocade / Ruckus E1MG-100FX-LR-OM compatible
- Brocade / Ruckus OC3-SFP-LR1 compatible
- Ciena (ex. Nortel) NTTP02ED compatible
- Ciena (ex. Nortel) NTTP08EDE6 compatible
- Ciena XCVR-040X31 compatible
- Cisco Systems GLC-FE-100EX compatible
- Cisco Systems ONS-SI-155-L1 compatible
- Cisco Systems SFP-OC3-LR1 compatible
- ComNet SFP-4 compatible
- Coriant (ex. Tellabs) TR-0002 compatible
- Ericsson RDH90120/B0228 compatible
- Extreme 10066 compatible
- FiberPlex SFP-SC03XC-3131-C compatible
- Hirschmann M-FAST SFP-SM/LC compatible
- HP H3C JD090A compatible
- Huawei eSFP-1310nm-L-1.1 compatible
- Huawei eSFP-FE-LH40-SM1310 compatible
- Huawei S-SFP-FE-LH40-SM1310 compatible
- Keymile 37973053 compatible
- Korenix SFP100SM30 compatible
- KTI Networks SFP-FCD-S30-A compatible
- LevelOne SFP-1411 compatible
- Marconi SU66AB compatible
- MRV SFP-O3D-LR1 compatible
- Net Insight NPA0016-LL11 compatible
- Nexans 88645907 compatible
- Nokia (ex. Alcatel-Lucent) 1AB194670005 compatible
- Nokia (ex. Alcatel-Lucent) 1AB376350002 compatible
- Nokia (ex. Alcatel-Lucent) 3HE00036AA compatible
- Nokia (ex. Alcatel-Lucent) OM155M-L1.1 compatible
- Nokia Siemens Networks V50017-U324-K500 compatible
- Nokia-Siemens (ex. Atrica) AT10015-ID-R compatible
- Perle PSFP-100D-S2LC40 compatible
- Planet MFB-F40 compatible
- RAD SFP-3D compatible
- Ribbon (ex. ECI) OTFE_SM compatible
- Ribbon (ex. ECI) OTR1_L3 compatible
- SagemCOM 252586245 compatible
- Telco Systems BTI-SFP-FEX-DD-LC compatible
- Transition Networks TN-SFP-OC3S3 compatible
- Volktek FPM-107-30 compatible
- Westermo 1100-0133 compatible
What customers say
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.