4G Fibre Channel SFP CWDM ~40 km / 18 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
SFP
4G FC LW
Universal Fibre Channel SFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
Fibre Channel (FC) support for storage area network (SAN) interconnect
Supported Data Rates: 1.05 Gbit/s - 4.25 Gbit/s
Powerbudget of 18 dB for up to 40 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
- CWDM
- ~40 km / 18 dB
- 4.25 G
Protocols
- 1G ETH
- 1G FC
- 2G FC
- 4G FC
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | 4G FC LW |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 1.05 Gbit/s - 4.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Internally Calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 18 dB |
| Transmit min/max per lane | 0 dBm / 5 dBm |
| Receiver min/max per lane | -18 dBm / -3 dBm (overload) @4G |
| Wavelength TX (Typical) | Channel R - 1610 nm |
|---|---|
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @4G |
| Transmit and Dispersion Penalty | 1 dB |
| Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 0061702698 compatible
- Brocade XBR-000146 compatible
- Brocade XBR-000174 compatible
- Ciena (ex. Nortel) NTK593TBE6 compatible
- Cisco Systems DS-CWDM4G1610 compatible
- HP Storage (B-Series) AN211A compatible
- HP Storage (C-Series) AG860A compatible
- Infinera (ex. Transmode) TRX100045/08 compatible
- Juniper (ex BTI Systems) BP3AM1CJ compatible
- MRV SFPFC4CW01-61 compatible
- Packetlight UL-CWM-4G-FC-S-CH1610 compatible
- Transition Networks TN-SFP-FC4XS-C61 compatible
Your vendor / compatibility is missing?
What customers say
Since we ordered a FLEXBOX, our life as definitly changed.
There’s a before and an after FLEXBOX.
So many vendors in the compatibility matrice, so easy way to configure the module!
And the cables and accessories came also with quality.
Stéphane Gouron
Directeur Agence Ouest, S-cube.
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.
Robert Niedermair
IT Infrastructure Administrator, INTERCABLE AUTOMOTIVE SOLUTIONS S.r.l.
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
Stefan van Merriënboer
Senior ICT Consultant / Effisol
Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver
Mike Dallaway
Mira 2014 Limited