3G SDI Video SFP, 100 GHz Grid - C-Band DWDM 100 km / 28 dB, DDM, LC-Duplex
SFP
3G SDI
Universal SDI SFP Transceiver - 100 GHz Grid - C-Band
Use FLEXBOX to configure to almost any vendor
DWDM for multiple applications over one duplex fiber
Supported Data Rates: 270 Mbit/s - 2.97 Gbit/s
Powerbudget of 28 dB for up to 100 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
- DWDM 100 GHz
- 100 km
- 2.97 G
- Video
Protocols
- 3G SDI
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | DWDM |
| Compliance Code | 3G SDI |
| Distance | 100 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 270 Mbit/s - 2.97 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| Inbuilt FEC | No |
| Powerbudget (dB) | 28 dB |
| Transmit min/max per lane | 0 dBm / 3 dBm |
| Receiver min/max per lane | -28 dBm / -8 dBm (overload) @3G |
| Wavelength TX (Typical) | Channel 61 - 1528.77 nm |
| Wavelength RX (Range) | 1270 - 1610 nm |
| Laser | DFB |
|---|---|
| Receiver Type | APD |
| Modulation | NRZ @3G |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 5 dB |
| Supported Protocols | 3G SDI |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
Your vendor / compatibility is missing?
What customers say
FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling.
The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
Dominik Grueber
Hetzner Online GmbH / Network Administrations
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen
Infrastructure Engineer, Previder B.V
On more than one occasion the flexbox significantly saved time for me by not having to scrub a deployment session but simply reconfigure a transceiver and carry on. This alone is a good reason that secures the flexbox a non-negotiable place in my datacenter-go-bag. However what really sets flexoptix apart is not them solving an irritating problem we all know. No. It is their vast inventory and know-how paired with impeccable QA. If I have a need for transceivers it is my single go-to source for procurement. They have exactly what I need in stock even before I know I need it, and when I need it, I can trust the order is in my hands in no time. Every single time. I can configure and deploy without doubt and without delay. It is rare to find such a valuable and dependable partner that reliably takes away a whole set of problems while offering decent pricing and a customer support that is above reproach.
Michael Horn
Telecommunications Infrastructure Security Professional
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
Bronislav Robenek
Network Architect, Cloud4com