10G SFP+ BiDi ZR with dual CDR 80 km, ᵀˣ1550 / ᴿˣ1490 nm, LC-Simplex, Singlemode
- 1550 nm
- 80 km
- 11.3 G
- BiDi
- 10G ETH
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP+ |
---|---|
Connector / Polish | LC-Simplex UPC |
Interface | Singlemode BiDi |
Compliance Code | BiDi ZR |
Distance | 80 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 9.95 Gbit/s - 11.3 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 2 W |
CDR | TX and RX |
---|---|
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 22 dB |
Transmit min/max per lane | -1 dBm / 4 dBm |
Receiver min/max per lane | -23 dBm / -6 dBm (overload) @10G |
Wavelength TX (Typical) | 1550 nm |
Wavelength TX (Range) | 1540 - 1560 nm |
Wavelength RX (Typical) | 1490 nm |
Wavelength RX (Range) | 1480 - 1500 nm |
---|---|
Laser | EML |
Receiver Type | APD |
Modulation | NRZ @10G |
Transmit and Dispersion Penalty | 3 dB |
Extinction Ratio | 7.5 dB |
Supported Protocols | 10G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party SFP-10G-ZR compatible
- Arista SFP-10G-ZR compatible
- Aruba Networks(ex. HP Network) J9153A compatible
- Cisco Systems SFP-10G-ZR compatible
- Extreme 10310 compatible
- Huawei OSX040N01 compatible
- Juniper EX-SFP-10GE-ZR compatible
- Juniper SFP-10GE-ZR compatible
- Nokia (ex. Alcatel-Lucent) 3FE55743AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE05894AA compatible
What customers say
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!