16G Fibre Channel SFP+ with dual CDR 100 m, λ850 nm, LC-Duplex, Multimode

Universal Fibre Channel SFP+ Transceiver
Use FLEXBOX to configure to almost any vendor
Fibre Channel (FC) support for storage area network (SAN) interconnect
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 4.25 Gbit/s - 14.03 Gbit/s
Up to 100 m via Multimode OM3
LC-Duplex Connector
Specs
  • 850 nm
  • 100 m
  • 14.03 G
Protocols
  • 16G FC
  • 4G FC
  • 8G FC
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
P.8516G.01.R:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Matching Products

LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
29 pcs in stock 94.05 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR

Specification

Form Factor SFP+
Connector / Polish LC-Duplex PC
Interface Multimode
Compliance Code 16G FC SW
Distance 100 m
Temperature Range 0°C - 70°C
Bandwidth 4.25 Gbit/s - 14.03 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 2.7 dB
Transmit min/max per lane -7.8 dBm / -1 dBm
Receiver min/max per lane -10.5 dBm / 0 dBm (overload) @16G
Wavelength TX (Typical) 850 nm
Wavelength TX (Range) 840 - 860 nm
Wavelength RX (Typical) 850 nm
Wavelength RX (Range) 840 - 860 nm
Laser VCSEL
Receiver Type PIN
Modulation NRZ @16G
Transmit and Dispersion Penalty 4.3 dB
Extinction Ratio 5 dB
Supported Protocols 16G Fibre Channel, 4G Fibre Channel, 8G Fibre Channel

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • MSA Standard (16G) compatible
  • ADVA 1061701135-01 compatible
  • Brocade XBR-000192 compatible
  • Cisco Systems DS-SFP-FC16G-SW compatible
  • Emulex LPE16100-OPTX2 compatible
  • Fujitsu SFP+ 16G SW compatible
  • HP Storage (B-Series) QK724A compatible
  • IBM Storage 98Y2176 compatible
  • Infinera (ex. Transmode) TRX100140 compatible
  • Lenovo 00WC089 compatible
  • Lenovo 88Y6393 compatible
  • NetApp X-48895-00-0E-R6-C compatible
  • NetApp X6596-R6 compatible
  • NetApp X6602A-R6 compatible
  • Oracle 7101676 compatible
  • QLogic SFP16-SR-SP compatible
  • QSAN 22-4850JU16-G0 compatible
  • Ribbon (ex. ECI) OTP16_MM compatible
Your vendor / compatibility is missing?

What customers say

When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The Flexbox is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.

Stefan Lieven Teamleitung EDV / Pflegeheime Esslingen
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
Shaun James Engineering Inspector, Tata Steel Strip Products UK
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well. Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play. If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before. Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect Aviatrix
Formerly a System & Network Engineer at the service of French Academic and Research Network and currently developing my own IT services business, I have been a strong advocate of FLEXOPTIX "one-SFP-fits-all" approach since 2015! Having purchased close to 1500 optics over the last few years for different kinds of projects (Metropolitan & Campus Networks, Datacenter, Nexans FTTO projects), I have always been completely satisfied with FLEXOPTIX products. I have had the opportunity to test several competing solutions and for me "FLEXBOX" is by far the most advanced in terms of functionality, ease of use and compatibility. Beyond the flawless technical aspects, the many human qualities of the different people I have had the opportunity to exchange with are a priceless advantage: sympathy, reactivity, impressive know-how, infallible logistics and after-sales services, FLEXOPTIX is a company you enjoy working with and you can trust one hundred percent. Thanks a lot guys!
Francis Monestier System & Network Engineer / JigWan
More