10G SFP+ Tunable DWDM ER with dual CDR 40 km, 96 Channels, 50GHz Grid, C-Band, LC-Duplex, Singlemode
- DWDM 50GHz
- 40 km
- 11.3 G
- Tunable
- 10G ETH
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP+ |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode DWDM 50GHz |
Compliance Code | ER |
Distance | 40 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 9.95 Gbit/s - 11.3 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 2 W |
---|---|
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 12 dB |
Transmit min/max per lane | -2 dBm / 3 dBm |
Receiver min/max per lane | -14 dBm / 0 dBm (overload) @10G |
Wavelength TX (Typical) | tunable DWDM 50GHz |
TX Tunable Range | 1529.16 - 1567.13 nm |
---|---|
Wavelength RX (Range) | 1525 - 1575 nm |
Laser | ILMZ |
Receiver Type | PIN |
Modulation | NRZ @10G |
Chromatic Dispersion Tolerance | -700 ps/nm to 700 ps/nm @10G |
Extinction Ratio | 9 dB |
Supported Protocols | 10G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Nokia (ex. Alcatel-Lucent) 3FE65831AA compatible
- Juniper EX-SFP-10GE-ER compatible
What customers say
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!