16G Fibre Channel SFP+ CWDM with dual CDR ~40 km / 14 dB, 1470 nm - 1610 nm, LC-Duplex
SFP+
16G FC LW
Universal Fibre Channel SFP+ Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
Fibre Channel (FC) support for storage area network (SAN) interconnect
Supported Data Rates: 4.25 Gbit/s - 14.03 Gbit/s with dual CDR
Powerbudget of 14 dB for up to 40 km using an OS2 ITU-T G.652 fiber
Specs
- CWDM
- ~40 km / 14 dB
- 14.03 G
- Dual CDR
Protocols
- 16G FC
- 4G FC
- 8G FC
Specification
| Form Factor | SFP+ |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | CWDM |
| Compliance Code | 16G FC LW |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 4.25 Gbit/s - 14.03 Gbit/s |
| Digital Diagnostic Management (DDM) | Internally Calibrated |
| Power Consumption | 1.8 W |
|---|---|
| CDR | TX and RX |
| Inbuilt FEC | No |
| Powerbudget (dB) | 14 dB |
| Transmit min/max per lane | 0 dBm / 4 dBm |
| Receiver min/max per lane | -14 dBm / 0 dBm (overload) @16G |
| Wavelength TX (Typical) | Channel R - 1610 nm |
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | EML |
|---|---|
| Receiver Type | PIN |
| Modulation | NRZ @16G |
| Transmit and Dispersion Penalty | 2.5 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 16G Fibre Channel, 4G Fibre Channel, 8G Fibre Channel |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Brocade XBR-000198 compatible
- Cisco Systems DS-SFP-FC16G-LW compatible
- HP Storage (B-Series) QK725A compatible
Your vendor / compatibility is missing?
What customers say
The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.
Tim Waterham
ICT Infrastructure Engineer - Wyre Borough Council
Absolutely Flawless! Ultrafast delivery and real plug & play from start to finish. Now we're able to react on needs much quicker thanks to the FLEXBOX.
Having Universal Transceiver on stock and instantly program them to customer's need is amazing.
Elmar Gruber
H82 medientechnik GmbH
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede
CEO, EC-Hosting
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen
Infrastructure Engineer, Previder B.V