200G QSFP-DD LR4 with dual CDR 10 km, λ1296-1309 nm, LC-Duplex, Singlemode
Universal QSFP-DD Transceiver
For 200GBASE-LR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
8x 26.56G NRZ electrical input / 4x 53.1G PAM4 electrical input possible
Supported Data Rates: 212.4 Gbit/s
Up to 10 km via Singlemode OS2
LC-Duplex Connector
Specs
- int. Mux
- 10 km
- 212.4 G
- LC
Protocols
- 200G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP-DD |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | LR4 |
Distance | 10 km |
Temperature Range | 0°C - 70°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 212.4 Gbit/s |
Bandwith Per Lane | 53.1 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 10.8 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 6.3 dB |
Transmit min/max per lane | -3.4 dBm / 5.3 dBm |
Receiver min/max per lane | -9.7 dBm / 5.3 dBm (overload) @200G |
Wavelength TX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
Wavelength RX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
---|---|
Laser | EML |
Receiver Type | PIN |
Modulation | PAM4 @200G |
Transmit and Dispersion Penalty | 3.2 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 200G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use
1. Slide-In
- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
2. Insert A Transceiver
- Insert a Universal Transceiver into the corresponding slot
3. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
4. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
Your vendor / compatibility is missing?
What customers say
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect
Aviatrix
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!
Michael Nicolaou
Senior Network Consultant, CDMA Services Ltd
When in possession of the Flexbox it becomes and indispensable tool in general, and also specifically in managing remote Mobile Base Stations fiber connectivity.
Using the Flexbox either with PC or Smartphone is really plug and play with no annoying incompatibility issues at all.
The Flexbox together with ease of order and superior delivery times makes it literally unnecessary for us having any significant SFP stock.
Terji Leitisstein Hansen
RAN Manager, Vodafone FO
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
Shaun James
Engineering Inspector, Tata Steel Strip Products UK