10G XFP SR Industrial with dual CDR 300 m, λ850 nm, LC-Duplex, Multimode
- 850 nm
- 300 m
- 11.1 G
- Industrial
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Multimode |
| Compliance Code | SR |
| Distance | 300 m |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
|---|---|
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 3.8 dB |
| Transmit min/max per lane | -7.3 dBm / -1 dBm |
| Receiver min/max per lane | -11.1 dBm / 1 dBm (overload) @10G |
| Wavelength TX (Typical) | 850 nm |
| Wavelength TX (Range) | 840 - 860 nm |
|---|---|
| Wavelength RX (Typical) | 850 nm |
| Wavelength RX (Range) | 840 - 860 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1442901G1 compatible
- ADVA 1061701845-01 compatible
- Allied Telesis # 13412 compatible
- Avaya (ex. Nortel) # 13413 compatible
- Ciena XCVR-A00Z85 compatible
- Cisco Systems # 13408 compatible
- Cyan 280-0120-00 compatible
- Dell (ex. Force10) # 13418 compatible
- Extreme # 13417 compatible
- Extreme (ex. Enterasys) # 13416 compatible
- H3C (ex. 3COM) # 13409 compatible
- Hirschmann M-XFP SR/LC compatible
- Hitachi # 13420 compatible
- HP H3C # 13421 compatible
- Huawei # 13423 compatible
- Infinera (ex. Transmode) # 13432 compatible
- Juniper (ex BTI Systems) # 13414 compatible
- Juniper SRX-XFP-10GE-SR-ET compatible
- Juniper XFP-10G-S compatible
- LevelOne # 13425 compatible
- MikroTik # 13426 compatible
- Moxa # 13427 compatible
- MRV # 13428 compatible
- Nokia (ex. Alcatel-Lucent) 1AB375380011 compatible
- Nokia Siemens Networks # 13429 compatible
- Packetlight SL102 compatible
- Palo Alto Networks # 13430 compatible
- RAD XFP-4DH compatible
- Radware # 13431 compatible
- Ribbon (ex. ECI) # 13415 compatible
What customers say
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.