10G XFP SR with dual CDR 300 m, λ850 nm, LC-Duplex, Multimode

Universal XFP Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-SR Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 8.5 Gbit/s - 11.1 Gbit/s
Up to 300 m via Multimode OM3
LC-Duplex Connector
Specs
  • 850 nm
  • 300 m
  • 11.1 G
Protocols
  • 10G ETH
  • 10G FC
  • 8G FC
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
X.8596.02:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor XFP
Connector / Polish LC-Duplex PC
Interface Multimode
Compliance Code SR
Distance 300 m
Temperature Range 0°C - 70°C
Bandwidth 8.5 Gbit/s - 11.1 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 3.8 dB
Transmit min/max per lane -7.3 dBm / -1 dBm
Receiver min/max per lane -11.1 dBm / 1 dBm (overload) @10G
Wavelength TX (Typical) 850 nm
Wavelength TX (Range) 840 - 860 nm
Wavelength RX (Typical) 850 nm
Wavelength RX (Range) 840 - 860 nm
Laser VCSEL
Receiver Type PIN
Modulation NRZ @10G
Extinction Ratio 3.5 dB
Supported Protocols 10G Ethernet, 10G FC, 8G Fibre Channel, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • MSA Standard (8G) compatible
  • ADTRAN 1442901G1 compatible
  • ADVA 0061701825 compatible
  • ADVA 0061701825-02 compatible
  • ADVA 1061701837-01 compatible
  • ADVA 1061701837-02 compatible
  • Alcatel-Lucent Ent. 3HE00566AA compatible
  • Allied Telesis AT-XPSR compatible
  • Arris 722873 compatible
  • Avaya (ex. Nortel) AA1403005-E5 compatible
  • Brocade / Ruckus 10G-XFP-SR compatible
  • Calix 100-01629 compatible
  • Ciena (ex. Nortel) NTTP81AA compatible
  • Ciena (ex. Nortel) NTTP86AA compatible
  • Ciena XCVR-000Z85 compatible
  • Cisco Systems ONS-XC-10G-SR-MM compatible
  • Cisco Systems XFP-10G-MM-SR compatible
  • Citrix Netscaler EW3F0000713 compatible
  • Cyan 280-0056-00 compatible
  • D-LINK DEM-421XT compatible
  • Dell (ex. Force10) GP-XFP-1S compatible
  • Edge Core ET5302-SR compatible
  • Extreme (ex. Enterasys) 10GBASE-SR-XFP compatible
  • Extreme 10121 compatible
  • F5 Networks OPT-0012 compatible
  • Fortinet FG-TRAN-XFP-SR compatible
  • Fujitsu S26361-F3206-E10 compatible
  • H3C (ex. 3COM) 3CXFP94 compatible
  • Hirschmann M-XFP SR/LC compatible
  • Hitachi 10GBASE-SR compatible
  • HP H3C JD117B compatible
  • Huawei XFP-10G-MM850 compatible
  • Huawei XFP-SX-MM850 compatible
  • Infinera (ex. Transmode) TRX100029 compatible
  • Infinera (ex. Transmode) TRX100077 compatible
  • Juniper (ex BTI Systems) BP3AM4SS compatible
  • Juniper EX-XFP-10GE-SR compatible
  • Juniper NS-SYS-GBIC-MXSR compatible
  • Juniper SRX-XFP-10GE-SR compatible
  • Juniper XFP-10G-S compatible
  • Keysight (ex. Ixia) XMM850-E compatible
  • LevelOne XFP-5901 compatible
  • Marconi SU58BA compatible
  • McAfee IAC-X850-CG1A compatible
  • MikroTik # 13405 compatible
  • Moxa # 13406 compatible
  • MRV XFP-10GD-SX compatible
  • Myricom 10G-XFP-SR compatible
  • Netgear AXM751 compatible
  • NetOptics XFPKT-50SR compatible
  • Netscout 321-1279 compatible
  • Niveo N10GMM compatible
  • Nokia (ex. Alcatel-Lucent) 3FE50712AA compatible
  • Nokia (ex. Alcatel-Lucent) 3HE00566CA compatible
  • Nokia Siemens Networks V50017-U770-K500 compatible
  • Packetlight SL102 compatible
  • Palo Alto Networks PAN-XFP-SR compatible
  • Perle PXFP-10GD-M2LC008 compatible
  • RAD XFP-4D compatible
  • Radware 9062096 compatible
  • Redback OIM-SXFP-10GE-SR compatible
  • Ribbon (ex. ECI) OTFC8_MM compatible
  • Ribbon (ex. ECI) OTR103_SR compatible
  • Sandvine 100-00159 compatible
  • Sorrento Networks GMXFP-10G-MM compatible
  • Supermicro XFP SR compatible
  • Telco Systems BTI-10GSR-DD-XFP compatible
  • Transition Networks TN-XFP-SR compatible
  • Trend Micro (ex. TippingPoint) JC011A compatible
  • Viavi (ex. JDSU) PLRXXL-SC-S43-C1 compatible
  • VSS monitoring VX_00015 compatible
  • Waystream (ex. Packetfront) XFP-10GE-SR compatible
  • Zyxel XFP-SR compatible
Your vendor / compatibility is missing?

What customers say

With the FLEXBOX we’re able to use our Transceivers universally in all kind of equipment and reduce the stock keeping significantly. Just awesome!
Christian Seitz Head of Network, STRATO AG

The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.

Sebastian Giss System Engineer/cyon.ch
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors. Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
Bronislav Robenek Network Architect, Cloud4com

The flexbox has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!

We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.

The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.

The flexoptix universal transceivers are very easy to configure and we will be ordering these in the future.

Tim Waterham ICT Infrastructure Engineer - Wyre Borough Council
More