10G XFP ER Industrial with dual CDR 40 km, λ1550 nm, LC-Duplex, Singlemode
XFP
ER
Universal XFP Transceiver
Use FLEXBOX to configure to almost any vendor
For 10GBASE-ER Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 8.5 Gbit/s - 11.1 Gbit/s
Up to 40 km via Singlemode OS2
LC-Duplex Connector
Operating Temperature from -40°C to 85°C
Specs
- 1550 nm
- 40 km
- 11.1 G
- Industrial
Protocols
- 10G ETH
- 10G FC
- 8G FC
- OTU2
- STM-64
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | XFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | ER |
| Distance | 40 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 8.5 Gbit/s - 11.1 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
| CDR | TX and RX |
|---|---|
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 15 dB |
| Transmit min/max per lane | -1 dBm / 2 dBm |
| Receiver min/max per lane | -16 dBm / -1 dBm (overload) @10G |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1530 - 1565 nm |
| Wavelength RX (Typical) | 1550 nm |
| Wavelength RX (Range) | 1270 - 1600 nm |
|---|---|
| Laser | EML |
| Receiver Type | PIN |
| Modulation | NRZ @10G |
| Transmit and Dispersion Penalty | 2 dB |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | 10G Ethernet, 10G FC, 8G Fibre Channel, OTU2, STM-64 |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- MSA Standard (Default) X.1596.40 (8G) compatible
- ADTRAN 1442940G1 compatible
- ADTRAN 1442940G1C compatible
- ADVA 0061701812 compatible
- Alcatel-Lucent Ent. 3HE00876AA compatible
- Allied Telesis AT-XPER40 compatible
- Arris 780243 compatible
- Avaya (ex. Nortel) AA1403003-E5 compatible
- Brocade / Ruckus 10G-XFP-ER compatible
- Calix 100-01426 compatible
- Ciena (ex. Nortel) NTTP80DA compatible
- Ciena XCVR-040V55 compatible
- Cisco Systems XFP-10GER-192IR+ compatible
- Cyan 280-0015-00 compatible
- Cyan 280-0121-00 compatible
- Dell (ex. Force10) GP-XFP-1E compatible
- Dell 407-11003 compatible
- Edge Core ET5302-ER compatible
- Extreme (ex. Enterasys) 10GBASE-ER-XFP compatible
- Extreme 10124 compatible
- F5 Networks OPT-0014 compatible
- Force10 / Juniper GP-XFP-1E compatible
- Fujitsu FIM31113/120 compatible
- H3C (ex. 3COM) 3CXFP96 compatible
- Hirschmann M-XFP-ER/LC compatible
- Hitachi 10GBASE-ER compatible
- HP H3C JD121A compatible
- Huawei OSX040N09 compatible
- Huawei XFP-1550-10GE-40km compatible
- Huawei XFP-STM64-LH40-SM1550 compatible
- Infinera (ex. Transmode) TRX100050 compatible
- Juniper (ex BTI Systems) BP3AM4LI compatible
- Juniper EX-XFP-10GE-ER compatible
- Juniper SRX-XFP-10GE-ER compatible
- Juniper XFP-10G-E-OC192-IR2 compatible
- Keysight (ex. Ixia) XSM1310 compatible
- LevelOne # 13362 compatible
- Marconi SU69BC compatible
- Marconi SU69CC compatible
- McAfee IAC-1550-CG1A compatible
- MikroTik # 13363 compatible
- Moxa # 13364 compatible
- MRV XFP-10GD-IR2 compatible
- Net Insight NPA0038-IR21 compatible
- NetOptics XFPKT-ER compatible
- Nokia (ex. Alcatel-Lucent) 1AB217280001 compatible
- Nokia (ex. Alcatel-Lucent) 1AB375380003 compatible
- Nokia (ex. Alcatel-Lucent) 1AB375380005 compatible
- Nokia (ex. Alcatel-Lucent) 3FE50712CA compatible
- Nokia (ex. Alcatel-Lucent) 3HE00876CA compatible
- Nokia (ex. Alcatel-Lucent) 3HE05832CA compatible
- Nokia Siemens Networks V50017-U772-K500 compatible
- Nokia Siemens Networks V50017-U776-K500 compatible
- Nortel / Juniper / NSN XFP-ER compatible
- Packetlight SL103 compatible
- Palo Alto Networks PAN-XFP-ER compatible
- Perle PXFP-10GD-S2LC40 compatible
- RAD XFP-3DH compatible
- Radware # 13367 compatible
- Raisecom UXFP-192/S2 compatible
- Ribbon (ex. ECI) OTR103_ER compatible
- Ribbon (ex. ECI) OTR64I_PS5 compatible
- Telco Systems BTI-10GER-DD-XFP compatible
- Transition Networks TN-XFP-ER compatible
Your vendor / compatibility is missing?
What customers say
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen
Infrastructure Engineer, Previder B.V
FLEXBOX is not only awesome but also easy to use. One of the standout features of FLEXOPTIX is their compatibility with various vendors. Whether you're working with different hardware providers, you can rely on FLEXOPTIX to work seamlessly across different platforms.
Moreover, the support for FLEXBOX and FLEXOPTIX is exceptional. If you encounter any issues or have questions, you can rely on the support teams to provide timely and effective assistance. They are dedicated to ensuring that users have a smooth experience and can make the most of these technologies.
Reijo Hakala
Specialist / DNA Ltd.
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.
Sebastian Giss
System Engineer/cyon.ch
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.
Adam Montgomery
Necto Inc