100BASE-TX Industrial Copper SFP 100 m, RJ-45, Autoneg, RX_LOS, SERDES, 10 Mbit/s - 125 Mbit/s

Universal Copper SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Supported Data Rates: 10 Mbit/s - 125 Mbit/s
Up to 100 m via CAT5e Cable
RJ-45 connector
Operating Temperature from -40°C to 85°C
Specs
  • Copper
  • 100 m
  • 125 M
  • Industrial
Protocols
  • 100M ETH
  • 10M ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
T.C03.02.EI:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

Lower Temperature Range
100BASE-TX Copper SFP 100 m, RJ-45, Autoneg, RX_LOS, SERDES, 10 Mbit/s - 125 Mbit/s 
100BASE-TX Copper SFP | 100 m, RJ-45, Autoneg, RX_LOS, SERDES, 10 Mbit/s - 125 Mbit/s
0 pcs in stock As low as 65.84 EUR

Specification

Form Factor SFP
Connector / Polish RJ-45
Interface Copper
Compliance Code T
Distance 100 m
Temperature Range -40°C - 85°C
Bandwidth 10 Mbit/s - 125 Mbit/s
Digital Diagnostic Management (DDM) not implemented
Power Consumption 1.05 W
Supported Protocols Ethernet, Fast Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Cisco Systems GLC-FE-T-I compatible
  • Hirschmann M-FAST SFP-TX compatible
  • Zyxel SFP-100T compatible
Your vendor / compatibility is missing?

What customers say

The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.

Looking forward to keep using the flexbox in the future! :)

Stan van de Klippe Chief Executive Officer-royalehosting.net
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri CTO, SGN d.o.o.
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen Infrastructure Engineer, Previder B.V
Using FLEXBOX we have been able to deliver high quality optical adapter product range in a mixed brand environment, with the maximum flexibility in managing logistic and stock costs. It is a definitely a tool that every professional should use.
Laert Klemo CTO, Eagle Security System
More