100BASE-TX Copper SFP 100 m, RJ-45, Autoneg, RX_LOS, SERDES, 10 Mbit/s - 125 Mbit/s

Universal Copper SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Supported Data Rates: 10 Mbit/s - 125 Mbit/s
Up to 100 m via CAT5e Cable
RJ-45 connector
Specs
  • Copper
  • 100 m
  • 125 M
Protocols
  • 100M ETH
  • 10M ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
T.C03.02.E:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish RJ-45
Interface Copper
Compliance Code T
Distance 100 m
Temperature Range 0°C - 70°C
Bandwidth 10 Mbit/s - 125 Mbit/s
Digital Diagnostic Management (DDM) not implemented
Power Consumption 1.05 W
Supported Protocols Ethernet, Fast Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Cisco Systems GLC-FE-T-I compatible
  • Hirschmann M-FAST SFP-TX compatible
  • Moxa SFP-1FEMLC-T compatible
  • Nokia (ex. Alcatel-Lucent) 3FE63343AA compatible
  • Nokia-Siemens (ex. Atrica) [100TX] compatible
  • Planet MFB-FX compatible
  • Riverstone SFPFX-09 compatible
  • Westermo 1100-0172 compatible
  • Zyxel SFP-100T compatible
Your vendor / compatibility is missing?

What customers say

Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.
Extensive list of supported vendors. Your product is like a Swiss Army Knife that all Engineers should have!! Great Job and keep it up!
Fahad Dalwai Network Engineer, Abdulaziz Abdulmohsin Al-Rashed Sons Co. W.L.L.

Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.

Christian Brasolin Senior System Engineer / Netica SRL

I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.

Denis Kempeneers Network Consultant-globalnetwork.tech
More