1000BASE-T Copper SFP 100 m, RJ-45, Autoneg, NO RX_LOS, Preferred Master, SGMII, 12 Mbit/s - 1.25 Gbit/s

- Copper
- 100 m
- 1.25 G
- 100M ETH
- 10M ETH
- 1G ETH
-
Alternatives
-
Alternatives
Specification
Form Factor | SFP |
---|---|
Connector / Polish | RJ-45 |
Interface | Copper |
Compliance Code | T |
Operating Temperature | Standard |
---|---|
Distance | 100 m |
Temperature Range | 0°C - 70°C |
Bandwidth | 12.5 Mbit/s - 1.25 Gbit/s |
Digital Diagnostic Management (DDM) | not implemented |
---|---|
Power Consumption | 1.06 W |
Supported Protocols | Ethernet, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Ciena XCVR-B00CRJ compatible
- Cisco Systems SFP-GE-T compatible
- Dell SFP-1G-T compatible
- FibroLAN SF1G-TX compatible
- Huawei SFP-1000BaseT compatible
- Juniper (ex BTI Systems) BP3AD3ES compatible
- RAD SFP-30H compatible
- Raisecom USFP-GE compatible
- Teleste MSG010C compatible
What customers say
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Working with a lot of different vendor and devices, it is always a problem to find the compatible transceiver from different distributors and especially to ensure that it is really compatible. I have found FLEXOPTIX, and the FLEXBOX and I must say that this is awesome! We can now simply buy generic transceivers and program them with the FLEXBOX and the FLEXOPTIX App. The application is fantastic and very easy to use! This makes us save a lot of time and no more concern about the compatibility.