1000BASE-T Industrial Copper SFP 100 m, RJ-45, Autoneg, Preferred Master, RX_LOS, SERDES, 12 Mbit/s - 1.25 Gbit/s

- Copper
- 100 m
- 1.25 G
- Industrial
- 100M ETH
- 10M ETH
- 1G ETH
-
Alternatives
-
Alternatives
Specification
Form Factor | SFP |
---|---|
Connector / Polish | RJ-45 |
Interface | Copper |
Compliance Code | T |
Operating Temperature | Industrial |
---|---|
Distance | 100 m |
Temperature Range | -40°C - 85°C |
Bandwidth | 12.5 Mbit/s - 1.25 Gbit/s |
Digital Diagnostic Management (DDM) | not implemented |
---|---|
Power Consumption | 1.05 W |
Supported Protocols | Ethernet, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling.
The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
I had the chance to flash my first transceiver with the FLEXBOX and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the FLEXBOX. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my FLEXBOX for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.