1000BASE-T Industrial Copper SFP 100 m, RJ-45, Autoneg, NO RX_LOS, Preferred Master, SERDES, 12 Mbit/s - 1.25 Gbit/s

Universal Copper SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Supported Data Rates: 12.5 Mbit/s - 1.25 Gbit/s
Up to 100 m via CAT5e Cable
RJ-45 connector
Operating Temperature from -40°C to 85°C
Specs
  • Copper
  • 100 m
  • 1.25 G
  • Industrial
Protocols
  • 100M ETH
  • 10M ETH
  • 1G ETH
Request compatibility
Part number
T.C12.02.AI
In stock
402 pcs
Back In Stock
Estimated arrival of additional items.
Our order confirmation will provide the final shipping date.
  • ~Mar 28, 2023
    +300 pcs
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

Lower Temperature Range
1000BASE-T Copper SFP 100 m, RJ-45, Autoneg, NO RX_LOS, Preferred Master, SERDES, 12 Mbit/s - 1.25 Gbit/s 
1000BASE-T Copper SFP | 100 m, RJ-45, Autoneg, NO RX_LOS, Preferred Master, SERDES, 12 Mbit/s - 1.25 Gbit/s
2054 pcs in stock 65.84 EUR

Specification

Form Factor SFP
Connector / Polish RJ-45
Interface Copper
Type T
Distance 100 m
Temperature Range -40°C - 85°C
Bandwidth 12.5 Mbit/s - 1.25 Gbit/s
Digital Diagnostic Management (DDM) not implemented
Power Consumption 1.4 W
Special Features Autoneg, NO RX_LOS, Preferred Master, SERDES
Supported Protocols Ethernet, Fast Ethernet, Gigabit Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 0061705890 compatible
  • Arris 722872 compatible
  • Aruba Networks(ex. HP Network) J8177C compatible
  • Avaya (ex. Nortel) AA1419043-E6 compatible
  • Cambium Networks SFP-1G-Copper compatible
  • Ceragon SFP-GE-COPER-EXT-TEMP compatible
  • Ciena XCVR-A00CRJ compatible
  • Cisco Systems (ex. Linksys) MGBT1 compatible
  • Cisco Systems GLC-TE compatible
  • ComNet SFP-1 compatible
  • Coriant (ex. Tellabs) 81.S1GBE450010 compatible
  • CTC Union ISFP-T7T00-00-E compatible
  • ECI ETGBE compatible
  • Extreme (ex. Enterasys) MGBIC-02 compatible
  • F5 Networks F5-UPG-SFPC-R compatible
  • Fortinet FG-TRAN-GC compatible
  • Hirschmann M-SFP-TX/RJ45 EEC compatible
  • Huawei OEGD01N01 compatible
  • Huawei SFP-1000BaseT compatible
  • Huawei SFP-GE-T compatible
  • Intel SFP-T compatible
  • Juniper EX-SFP-1GE-T compatible
  • Juniper NS-SYS-GBIC-MTX compatible
  • Juniper QFX-SFP-1GE-T compatible
  • Juniper SFP-1GE-FE-E-T compatible
  • Juniper SFP-1GE-T compatible
  • Juniper SRX-SFP-1GE-T compatible
  • LANCOM SFP-CO1 compatible
  • Net Insight NPA0040-T001 compatible
  • Nokia (ex. Alcatel-Lucent) 3FE28784AA compatible
  • Nokia (ex. Alcatel-Lucent) 3HE00062CB compatible
  • Palo Alto Networks PAN-SFP-CG compatible
  • RAD SFP-9-GH compatible
  • Redlion NTSFP-TX compatible
  • Telco Systems BTI-MGBIC-M-T-TX compatible
  • Ubiquiti Networks UF-RJ45-1G compatible
  • Westermo 1100-0148 compatible
Your vendor / compatibility is missing?

What customers say

Spending a few minutes of my time, first and foremost expressing how much I’m impressed by your friendliness, is the least I can do. Friendliness was followed by super-fast order processing and delivery. In a few words, unboxing and using your Flexbox is an utterly awesome experience. As in brilliant. Also saving us loads of time ordering optics. In addition to all of this – you deliver particular good build quality, too. You’ve got me impressed, thank you!
Mark van den Berg CTO - Icera Networks
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
René Oskar Kühne Retired scientist, now acting in the field of IT support, R.O. Kuehne
Formerly a System & Network Engineer at the service of French Academic and Research Network and currently developing my own IT services business, I have been a strong advocate of FLEXOPTIX "one-SFP-fits-all" approach since 2015! Having purchased close to 1500 optics over the last few years for different kinds of projects (Metropolitan & Campus Networks, Datacenter, Nexans FTTO projects), I have always been completely satisfied with FLEXOPTIX products. I have had the opportunity to test several competing solutions and for me "FLEXBOX" is by far the most advanced in terms of functionality, ease of use and compatibility. Beyond the flawless technical aspects, the many human qualities of the different people I have had the opportunity to exchange with are a priceless advantage: sympathy, reactivity, impressive know-how, infallible logistics and after-sales services, FLEXOPTIX is a company you enjoy working with and you can trust one hundred percent. Thanks a lot guys!
Francis Monestier System & Network Engineer / JigWan
FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling. The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
Dominik Grueber Hetzner Online GmbH / Network Administrations
More