4G Fibre Channel SFP BiDi Industrial 40 km, ᵀˣ1550 / ᴿˣ1310 nm, DDM, LC-Simplex, Singlemode
SFP
BiDi 4G FC LW
Universal Fibre Channel SFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
Fibre Channel (FC) support for storage area network (SAN) interconnect
Supported Data Rates: 1 Gbit/s - 4.25 Gbit/s
Up to 40 km via Singlemode OS2
LC-Simplex Connector
Operating Temperature from -40°C to 85°C, Digital Diagnocstic Monitoring (DDM)
Specs
- 1550 nm
- 40 km
- 4.25 G
- Industrial
Protocols
- 1G ETH
- 1G FC
- 2G FC
- 4G FC
- STM-16
-
Matching Products
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi 4G FC LW |
| Distance | 40 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 1 Gbit/s - 4.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, externally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 24 dB |
| Transmit min/max per lane | 0 dBm / 5 dBm |
| Receiver min/max per lane | -24 dBm / -8 dBm (overload) @4G |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1530 - 1570 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1360 nm |
| Laser | DFB |
| Receiver Type | APD |
| Modulation | NRZ @4G |
| Transmit and Dispersion Penalty | 1 dB |
| Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, Gigabit Ethernet, STM-16 |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # 11897 compatible
- ADVA # 11898 compatible
- Allied Telesis # 11900 compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) # 11895 compatible
- Avaya (ex. Nortel) # 11902 compatible
- Brocade # 11903 compatible
- Check Point # 11905 compatible
- Ciena (ex. Nortel) # 11906 compatible
- Cisco Systems # 11894 compatible
- D-LINK # 11908 compatible
- Dell # 11907 compatible
- Dell (ex. Force10) # 11915 compatible
- Extreme # 11911 compatible
- Extreme (ex. Enterasys) # 11910 compatible
- F5 Networks # 11912 compatible
- FibroLAN # 11913 compatible
- Fluke Networks # 11914 compatible
- Fortinet # 11916 compatible
- Fujitsu # 11917 compatible
- H3C (ex. 3COM) # 11896 compatible
- Hirschmann # 11918 compatible
- HP H3C # 11919 compatible
- Huawei # 11920 compatible
- Infinera (ex. Transmode) # 11937 compatible
- Intel # 11922 compatible
- Juniper # 11923 compatible
- Juniper (ex BTI Systems) # 11904 compatible
- KTI Networks # 11924 compatible
- LANCOM # 11925 compatible
- Lenovo (ex. Blade Network) # 11921 compatible
- LevelOne # 11926 compatible
- MikroTik # 11927 compatible
- Moxa # 11928 compatible
- MRV # 11929 compatible
- Netgear # 11930 compatible
- Nokia (ex. Alcatel-Lucent) # 11899 compatible
- Nokia Siemens Networks # 11931 compatible
- Palo Alto Networks # 11933 compatible
- Radware # 11934 compatible
- Ribbon (ex. ECI) # 11909 compatible
- TP-LINK # 11935 compatible
- Transition Networks # 11936 compatible
- Waystream (ex. Packetfront) # 11932 compatible
Your vendor / compatibility is missing?
What customers say
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.
Stefan Kirbes
System Administrator / INTERCOM Austria GmbH
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect
Aviatrix
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede
CEO, EC-Hosting
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
Emilio Vargas
Production Manager / Liga ACE esports