1G SFP BiDi ZX+ 120 km, ᵀˣ1490 / ᴿˣ1550 nm, DDM, LC-Simplex, Singlemode
- 1490 nm
- 120 km
- 1.25 G
- BiDi
- 100M ETH
- 1G ETH
- 1G FC
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi ZX+ |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Distance | 120 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 125 Mbit/s - 1.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 34 dB |
| Transmit min/max per lane | 1 dBm / 5 dBm |
| Receiver min/max per lane | -33 dBm / -8 dBm (overload) @1G |
| Wavelength TX (Typical) | 1490 nm |
| Wavelength TX (Range) | 1484 - 1497.5 nm |
|---|---|
| Wavelength RX (Typical) | 1550 nm |
| Wavelength RX (Range) | 1530 - 1570 nm |
| Laser | DFB |
| Receiver Type | APD |
| Modulation | NRZ @1G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.